Amp Test Tuesday - Crunch V-Drive 1150.2 - Pre Guesses! (Results Page 6)

[HowLowCanYouGo]

669 watts

[Mike Whitenton]

987W

[Bass_Monster]

500 - 510 watts

[rockFord_Expedition]

guys, i am only asking for the BIGGEST number of the 3. If you post all 3 numbers, i will only accept your largest guess. Thanks! have fun, and next time, read what i write because you know, i do take time to write all that shit. You guys never pay attention.

Sorry boss those directions are a little tricky

I was fooled into posting 3 different numbers because of this in the OP:

Certified mode (test stops @ 1% distortion) xxxx watts

Non-Certified Mode (test stops @ Clipping) xxxx watts

Dynamic Burst RMS (test stops @ Clipping) xxxx watts

I figured you wanted us to solve for x

I must be institutionalized from all these damn math classes I take

plus I am half dumb more than half the time

this: just give me the highest achieved number IN THE MANUFACTURER'S lowest SPECIFIED impedance.

now i get it: only post one answer that you believe is the highest wattage achieved, at the manufacturers recommended lowest stable impedance.

A couple questions:

I am thinking the amp dyno would be an awesome tool to have at SPL competitions

How are they powered? by a battery bank

Could I take it from vehicle to vehicle on a cart? yes, that's what it is designed for. Watch the YouTube videos

Are they warrantied? if so how long and is an extended warranty offered? I am not sure about this one, Steve or TC could answer or you could even email west coast car audio to find out

Could I test a home amplifier? can't answer this for sure but its set up for dc voltage

Thanks!

-Sean

I figured those answers would do better than nothing incase Steve doesn't reply

Edited August 12, 2013 by FunkyExpedition

[mothra]

756, burst

[Sgt Jacob]

677

[McTw1st]

632wrms @ 4ohm

[TigoBling]

603

[walwalka]

Certified mode (test stops @ 1% distortion) 603w

Non-Certified Mode (test stops @ Clipping) 627w

Dynamic Burst RMS (test stops @ Clipping) 636w

[reg93f150]

Certified mode (test stops @ 1% distortion) 729 watts

Non-Certified Mode (test stops @ Clipping) 750 watts

Dynamic Burst RMS (test stops @ Clipping) 780 watts