CJSmith Posted September 29, 2013 Report Share Posted September 29, 2013 Following this, can't wait to see it done. *Rebuid in progress* Link to comment Share on other sites More sharing options...
Slinky Posted September 29, 2013 Report Share Posted September 29, 2013 How much port area do you have? Seems a bit small for 4 15's from the pictures. Completely depends on the subs. DD M4 Rockford Fosgate P500-4 SoundQubed HDC415 w carbon fiber cap 2 Rockford Fosagate T1675-S XS Power D3400 Under Hood XS Power D5100 in rear Michael Singer 200A Alt Build Log: http://www.stevemeadedesigns.com/board/topic/153901-2012-veloster-update-842013-wall-build-4-15s/ Link to comment Share on other sites More sharing options...
REEDSBUD Posted September 29, 2013 Report Share Posted September 29, 2013 I shall follow this build, very stoked to see the outcome!! Link to comment Share on other sites More sharing options...
sprkn_ranger Posted September 29, 2013 Report Share Posted September 29, 2013 How much port area do you have? Seems a bit small for 4 15's from the pictures.Completely depends on the subs. Yes, I understand that...should have waited to see what gear he was running first. Check out my build log! 4 Havocs in a blowthrough http://www.stevemeadedesigns.com/board/topic/187506-sprkn-rangers-blowthrough-build/ Link to comment Share on other sites More sharing options...
Brandonbkd Posted September 29, 2013 Report Share Posted September 29, 2013 Are you just running a single baffle? FI BL18 Build Log: CLICK HERE!! 2003 Explorer Sport: FI BL18 SoundQubed 2200 at 0.7ohm Pioneer DEH-2500UI Pioneer 6 x 8s Rockford Fosgate 6 x 9s 5 ft^3 box at 35hz Lots of Mega Mat Link to comment Share on other sites More sharing options...
toolshed Posted September 29, 2013 Author Report Share Posted September 29, 2013 port with holes filled. waiting for the filler to dry so it can be sanded and painted black Link to comment Share on other sites More sharing options...
toolshed Posted September 29, 2013 Author Report Share Posted September 29, 2013 put more bracing in and also painted the front of the box with one coat just to see what all needed to be filled and how much sanding is going to need to be done.... Link to comment Share on other sites More sharing options...
toolshed Posted September 29, 2013 Author Report Share Posted September 29, 2013 Link to comment Share on other sites More sharing options...
toolshed Posted September 29, 2013 Author Report Share Posted September 29, 2013 putting 4 15in. petras hyperthrows pushed by a earthquake shredder amp in. box tuned to 32 hz. port is 16 x4x 7.75... box is around 11.5 cubes.... these subs can be used in a 2 cube box. and even have seen people run lower than that..... but i wanted to put a bit more space due to having one in a 3 cube box and it had alot of low end..... I sure hope it slams... it's alot of work, just to pull it out to start all over...haha Link to comment Share on other sites More sharing options...
toolshed Posted October 1, 2013 Author Report Share Posted October 1, 2013 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.