gibblegeibel Posted September 29, 2013 Report Posted September 29, 2013 i have seen several people run three subs in a box on one amp. i was wondering what impedance would they use to do this?
tacomaguy1 Posted September 29, 2013 Report Posted September 29, 2013 I've done 3 d2's at .33 on one amp than 2 amps strapped at 1.3 (.66 each) Team Flex Issues
toolshed Posted September 30, 2013 Report Posted September 30, 2013 dual 6 ohm subs wired at 3 ohms per subs would be 1 ohm on the amp
Kenyel Dotts Posted September 30, 2013 Report Posted September 30, 2013 the only sub I no that comes in a 3/6ohm is the JBL MKII. if you want a pair to start I have 2 for $500. they have not ben broken in pm me if your interested King dingalingIts not finished till i say so Bit@^!
CstrokerV Posted September 30, 2013 Report Posted September 30, 2013 DC XLs you can get 1.4 ohm coils that would be .93333333 ohms so close to 1ohm my build http://www.stevemeadedesigns.com/board/topic/142505-small-build-log-4-dc-lvl3-10s-tl-update-link-to-rebuild/ http://www.stevemeadedesigns.com/board/topic/154258-rebuild-6-lvl3-12s-update-small-video-nothing-spectacular/ new build http://www.stevemeadedesigns.com/board/topic/188181-03-trailblazer-slow-build-8-dc-lvl3-12-m1-motor-m2-parts/
ben_slates Posted September 30, 2013 Report Posted September 30, 2013 im runing 3 2 ohm subs that i want to wire down to 1 ohm. i have a 1 ohm stable amp and either way i go about it im running 1.33 or .67 ohms. i thought about wiring them seperate other than together and running each's different wires to the amp. im looking for suggestions, recomendations, opinoins, anything that could help.
tacomaguy1 Posted September 30, 2013 Report Posted September 30, 2013 3 2ohm subs is either .33 or 1.33 what amp? Team Flex Issues
Recommended Posts
Archived
This topic is now archived and is closed to further replies.