Jump to content

Recommended Posts

So I finally decided to make a build log,it's nothing like most of the builds here but hopefully some of you will enjoy it. It's mostly complete but still have more gear to get and make some changes in the near future hopefully.. Any and all comments/suggestions/recommendations are welcome...Here's the gear as of now...... RF T1462, RF T2652-S, RF P1T-S, RF old school power tweeters, Boston Acoustics SC60 and 5.25's, RF T400-4 (tweets), RF T600-4(mids), RF P500-4(temp for coaxial speakers but will be replaced with my P500-2 for DD W6.5's for midbass), RF T2500-1 bdcp, 2 RF T2D412's, RF 3Sixty.3, RFC10HB, Stinger power/speaker wire,sound deadener, volt meter and 220 amp alternator(replaced with EA),SHCA speaker wire, RF power & speaker wire, Second Skin B-stock deadener, NVX sound deadener & remote turn on module, Dynamat Xtreme, XS Power D3400 (front) D1200 (rear), Project DB dual 1/0 inputs, Excessive Amperage 300 amp alt, SMD DD-1,CC-1 & VM-1 (not installed yet), Tech Flex, Xscorpion heat shrink,split loom,terminal connectors,1/0 crimp connectors and some fuses, PAC turn on module...... I may have forgotten some things but they'll come up in the pics.. Pics coming soon,I have to look on my sd card for any pics I didn't upload to Photobucket..

Link to comment
Share on other sites

Did you mean have the post end up scattered all over the page with no pics?

Link to comment
Share on other sites

Did you mean have the post end up scattered all over the page with no pics?

No,I had everything in columns but no matter what I try it keeps scattering them like that.. I'll be posting pics soon

Link to comment
Share on other sites

Link to comment
Share on other sites

Lollllllll. ....damm that was krazzzzy 2 read.... ;) ;) ;)

still trying to fix that, I have it columns but when I post it does that crazy shit..

Link to comment
Share on other sites

this is when I first got my new subs and amp next to the T1D412 and P1000.1 bd while my truck was in the body shop..2012-11-27202912_zpsea64bd2a.jpg2012-11-27202643_zps0772a8e2.jpg This is why the truck went to the body shop 2012-11-23160256_zps4c6c781a.jpg2012-11-26161209_zpsd6d760cf.jpg2012-11-26160109_zps0ee04c83.jpg

Link to comment
Share on other sites

This is the hood that I bought for it from JC Whitney which I will never buy from again. The hood turned out to be a nightmare on alignment and had dents on it right out of the box. 2012-08-21192222_zps0c44cbee.jpg

Link to comment
Share on other sites

Here it is at the shop,I helped with the tear down process. 2012-11-24152208_zps8cc2c1ef.jpg2012-11-26142858_zps76197d11.jpg2012-11-26154912_zpsc5a98e54.jpg My plan was to go ahead and run some of the power/ground wiring while it was at the shop. I ran the 2nd power run into the cab while the front end was off and I could access the firewall easier.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 341 Guests (See full list)

×
×
  • Create New...