Jump to content
Second Skin Audio

PORTS! and new Build!


Recommended Posts

okay so i was initially putting a sa-15 on 1k in my milan (which i did) but im starting a new build in like 3 months and seem to keep raising the question where should my ports be? well let me explain the build.....ok so the build is 6 sundown eV.3 8" subs on a rubicon 2500.1d ive researched electrical and found out that with my 150a alt and an xs d925 i can more then supply the power so with that being said im buying 2/0 ga wire to do the big 3 (overkill?) i have located 2/0 to 1/0 reducers from shca....box will be posted below....so the box is going to be a wall type build pretty much walled off directly behind the rear seats (60/40 split) my question is should i fire my ports up (towards the trunk) forward (towards the cab) or back (towards the rear bumper)

68s_zps58933468.png

mercury milan
1x SA-15
1x db Drive 1000.1d
1x db Drive 80.4
nexus 7 in dash
fosgate in doors and deck

Id imagine youd get alot of help if you posted in the right section

Link to comment
Share on other sites

Id imagine youd get alot of help if you posted in the right section

THERE IS NO BUILD LOG!

1998 Chevy Silverado ext cab

Alpine CDA-9887

4 Team Fi 15s

2 Ampere Audio TFE 8.0

2 Ampere Audio 150.4

3 Digital Designs CS6.5 component sets

Dual Mechman 370XP Elite alternators inbound!

8 XS Power d3400

6 XS power d680

Second Skin

Stinger

Tsunami Wiring

Sky High

A Real Voltmeter not a piece of shit stinger.

Link to comment
Share on other sites

Is this 2 4" ports for 6 8"s?

this is 2 4"x10"L i want more but i need ungodly port length to get the tuning lower

Id imagine youd get alot of help if you posted in the right section

i do apologize i wasnt paying attention

mercury milan
1x SA-15
1x db Drive 1000.1d
1x db Drive 80.4
nexus 7 in dash
fosgate in doors and deck

Id imagine youd get alot of help if you posted in the right section

Link to comment
Share on other sites

Is this 2 4" ports for 6 8"s?

this is 2 4"x10"L i want more but i need ungodly port length to get the tuning lower

2 - 4" ports will be woefully inadequate for 6 - 8" subs.

"Nothing prevents people from knowing the truth more than the belief they already know it."
"Making bass is easy, making music is the hard part."

Builds:

U7qkMTL.jpg  LgPgE9w.jpg  Od2G3u1.jpg  xMyLoO1.jpg  9pAlXUK.jpg

Link to comment
Share on other sites

Your going to need a lot more port area than that. I've had the sa8s. A 3" aero wasn't enough for a single sub. A 4 worked great. I would do 2 6" aeros

thanks for the input the main question i have is which way would be a good way to fire them??

mercury milan
1x SA-15
1x db Drive 1000.1d
1x db Drive 80.4
nexus 7 in dash
fosgate in doors and deck

Id imagine youd get alot of help if you posted in the right section

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 1878 Guests (See full list)

×
×
  • Create New...