Miguels Posted January 2, 2014 Report Share Posted January 2, 2014 i had a kinetik 1800 600 and stock group 48 batt on 1 t1500cp and dropped down to the 11s still with ofc 0 gauge wire all around and big3 0 gauge ofc all cars are different. I think kinetik sucks though the d3100 may be able to do it i own both XS batteries and kinetik and they are both good.. my brother has 2 hc 2000 and drops to only 13.6 with alt charging 13.9 to 14.0 with a DC alt.. when he was clipping it was dropping to 11 v so its safe to say you was clipping.. me with my mechman alt and the adjustable voltage wouldnt see below 14.4 on my kinetiks you was clipping or your stock group 48 was the reason why you was dropping bad my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
alaskanzx5 Posted January 2, 2014 Author Report Share Posted January 2, 2014 Gain was all the way down since I didn't have access to a dd1, the t400.4 was set with a dd1. t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
alaskanzx5 Posted January 2, 2014 Author Report Share Posted January 2, 2014 No bad boost either. The stock engine ground is crap and the ground on my cap was just to sheet metal. t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
Miguels Posted January 2, 2014 Report Share Posted January 2, 2014 if the battery will be in the front it will be hard to maintain high voltage at the amps.. it will help you more if you had the battery in the trunk or at least get a good capacitor my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
alaskanzx5 Posted January 2, 2014 Author Report Share Posted January 2, 2014 I have a Rockford 10 fared carbon cap that will only be hooked to the 2 1500.1bdcp amps with a short of wires as I can do. Going to have dual input for the cap made and i'm thinking a 3rd run ti a distro block for the 4 channels. t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
alaskanzx5 Posted January 2, 2014 Author Report Share Posted January 2, 2014 0 gauge to 4 gauge reducers for the 1500.1's now since I think of it to t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
SlamminBeats Posted January 2, 2014 Report Share Posted January 2, 2014 i had a kinetik 1800 600 and stock group 48 batt on 1 t1500cp and dropped down to the 11s still with ofc 0 gauge wire all around and big3 0 gauge ofc all cars are different. I think kinetik sucks though the d3100 may be able to do it i own both XS batteries and kinetik and they are both good.. my brother has 2 hc 2000 and drops to only 13.6 with alt charging 13.9 to 14.0 with a DC alt.. when he was clipping it was dropping to 11 v so its safe to say you was clipping.. me with my mechman alt and the adjustable voltage wouldnt see below 14.4 on my kinetiks you was clipping or your stock group 48 was the reason why you was dropping bad probably the under the hood battery if anything, i set my gains with the dd-1, and yes i know how to use the tool lol every car is different. I also didnt have the best ground. and my alt was tiny. Link to comment Share on other sites More sharing options...
alaskanzx5 Posted January 2, 2014 Author Report Share Posted January 2, 2014 Wish there was a way to figure out what voltage drop would be. At 14.4th according ti the math from that video it would take roughly 400 amps in which i'm sure a single d3100 plus the 250 amp alt would do the trick. Of course bit knowing voltage drop though I don't know what amperage it we need to make rated power. t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
TeamHT Posted January 2, 2014 Report Share Posted January 2, 2014 Not including rise. I'd just do the single D3100 and see how it goes from there. Also I know you said you had a dealer close but Mechman offers a 5% discount over the phone with free shipping in the lower 48. If that helps Tell me...does this smell like chloroform to you? Link to comment Share on other sites More sharing options...
alaskanzx5 Posted January 2, 2014 Author Report Share Posted January 2, 2014 Yeah i'm just trying ti get a rough idea of what i'm looking at fir needed power supply and what my voltage will look like. Once the box is built and in I know I can squeeze a small battery or 2 in some how. trying to figure it all out the best I can so I have a general idea of what to expect. t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.