JEFFYBOI Posted March 18, 2014 Report Posted March 18, 2014 There are plenty of Kenwood eXcelon HUs that are 3 sets of 4V preouts and under $200. Like a big majority of them are until you get into the top couple of models. for Kenwood excelon. Pioneer is good also. "Toyota Camry rebuild page 21 (link)http://www.stevemeadedesigns.com/board/topic/183768-94-crossfire-camry-18s-walled-singer-alt-has-arrived-rebuild-starts-pg-10/page-21 PIONEER DEH-P8400BH 2 CROSSFIRE C5 1700D 2 CROSSFIRE C7 18 HOOD. NSB GROUP48 TRUNK SMS AGM400 DUAL RUNS X SCORP 1/0 OFC 275A SINGER ALT. DYNAMAT XTREME SOUNDSTREAM TA4.280 PIONEER COMPONENTS
Motorboat KER Posted March 18, 2014 Report Posted March 18, 2014 I love a good honda. Lookin good and I hope those batteries treat ya well!
Grant Whalen Posted March 18, 2014 Author Report Posted March 18, 2014 On mobile ATM and no I bought separate from eBay about $30 a piece after shipping looking at the excelon from Kenwood but have eyes on an 80prs... Also KCowboy where in mn?
JEFFYBOI Posted March 19, 2014 Report Posted March 19, 2014 On mobile ATM and no I bought separate from eBay about $30 a piece after shipping looking at the excelon from Kenwood but have eyes on an 80prs... Also KCowboy where in mn?If possible let us know how those batteries turn out. That's a really good price if they are any good... I have owned so many HUs and I got the Kenwood excelon KDCX 994 a few years ago and I fell in love with them. "Toyota Camry rebuild page 21 (link)http://www.stevemeadedesigns.com/board/topic/183768-94-crossfire-camry-18s-walled-singer-alt-has-arrived-rebuild-starts-pg-10/page-21 PIONEER DEH-P8400BH 2 CROSSFIRE C5 1700D 2 CROSSFIRE C7 18 HOOD. NSB GROUP48 TRUNK SMS AGM400 DUAL RUNS X SCORP 1/0 OFC 275A SINGER ALT. DYNAMAT XTREME SOUNDSTREAM TA4.280 PIONEER COMPONENTS
Grant Whalen Posted March 19, 2014 Author Report Posted March 19, 2014 I will I don't have huge hopes for then if the fall through it's perfect dimensions for a second d3400 I think but the excelon KDC-X596 I have eyes on idk why just caught me with Bluetooth and 4v preouts with 22x4 rms
ThatGuyWithAJetta Posted March 20, 2014 Report Posted March 20, 2014 On mobile ATM and no I bought separate from eBay about $30 a piece after shipping looking at the excelon from Kenwood but have eyes on an 80prs... Also KCowboy where in mn? Mankato, unfortunately none of the loud guys live here they are all up by the cities, hoping to hit a couple of the meets up in st joseph this summer though once i get my system in !999.5 Volkswagen Jetta 1 Planet Audio BIg Bang 15 Powerbass 1500,1
Bump4life Posted March 20, 2014 Report Posted March 20, 2014 why did you put batteries in your middle console? weight distriubuton? and were you going for the rough look on the center console? why didnt you sand or use a body fill. just curious on both. not tryng to be a dick. nice alternator. i like to see things done right the first time Buyer/Seller Feedback Thread: http://www.stevemead...5015-bump4life/ MB C220 153 Trunk Car Build Log: http://www.stevemead...d/#entry1840136 MB C280 Ipad Dash SQ Build Log: http://www.stevemeadedesigns.com/board/topic/194484-bump4lifes-new-benz-tony-c-relay-kit-pictures-ce-electric-audison-front-stage-installed/ My SPL Log: http://www.stevemead...__fromsearch__1 BMW M340 xDrive Stock, for now. Corner Load 10" maybe soon. But does 10s in the 1/4... Best Scores out of a trunk 153.0 sealed legal full tilt clamped 5524 @ 42 hz 154+ windows down, 155+ kick
Grant Whalen Posted March 20, 2014 Author Report Posted March 20, 2014 why did you put batteries in your middle console? weight distriubuton? and were you going for the rough look on the center console? why didnt you sand or use a body fill. just curious on both. not tryng to be a dick. nice alternator. i like to see things done right the first time yeah i went for weight distribution on this cause the car is 20 years old and id rather not put money into coils and suspension until i get a new ripe to drive so then this would be a project car. However, the alt was a no brainer lol especially from basshead i saw it hold the batteries at charge and did a great job. The console however i am cutting up more when i am done due to 5 or 6 switches going into place for led lights killswitch Lc-1s etc. so its a temp job i will sand and redo the finish . (first time fiberglass/bondo)
Bump4life Posted March 20, 2014 Report Posted March 20, 2014 why did you put batteries in your middle console? weight distriubuton? and were you going for the rough look on the center console? why didnt you sand or use a body fill. just curious on both. not tryng to be a dick. nice alternator. i like to see things done right the first time yeah i went for weight distribution on this cause the car is 20 years old and id rather not put money into coils and suspension until i get a new ripe to drive so then this would be a project car. However, the alt was a no brainer lol especially from basshead i saw it hold the batteries at charge and did a great job. The console however i am cutting up more when i am done due to 5 or 6 switches going into place for led lights killswitch Lc-1s etc. so its a temp job i will sand and redo the finish . (first time fiberglass/bondo) i remember my first glass job. had smame kinda finish. maybe a little better lol. but smart idea i guess for weight. just cant compete in trunk class if you compete. but im tuned in!! Buyer/Seller Feedback Thread: http://www.stevemead...5015-bump4life/ MB C220 153 Trunk Car Build Log: http://www.stevemead...d/#entry1840136 MB C280 Ipad Dash SQ Build Log: http://www.stevemeadedesigns.com/board/topic/194484-bump4lifes-new-benz-tony-c-relay-kit-pictures-ce-electric-audison-front-stage-installed/ My SPL Log: http://www.stevemead...__fromsearch__1 BMW M340 xDrive Stock, for now. Corner Load 10" maybe soon. But does 10s in the 1/4... Best Scores out of a trunk 153.0 sealed legal full tilt clamped 5524 @ 42 hz 154+ windows down, 155+ kick
Grant Whalen Posted March 20, 2014 Author Report Posted March 20, 2014 why did you put batteries in your middle console? weight distriubuton? and were you going for the rough look on the center console? why didnt you sand or use a body fill. just curious on both. not tryng to be a dick. nice alternator. i like to see things done right the first time yeah i went for weight distribution on this cause the car is 20 years old and id rather not put money into coils and suspension until i get a new ripe to drive so then this would be a project car. However, the alt was a no brainer lol especially from basshead i saw it hold the batteries at charge and did a great job. The console however i am cutting up more when i am done due to 5 or 6 switches going into place for led lights killswitch Lc-1s etc. so its a temp job i will sand and redo the finish . (first time fiberglass/bondo) i remember my first glass job. had smame kinda finish. maybe a little better lol. but smart idea i guess for weight. just cant compete in trunk class if you compete. but im tuned in!! yeah i figured as so but i can always see what numbers i do lol plus its getting sealed from the trunk so i think that would throw me out too
Recommended Posts
Archived
This topic is now archived and is closed to further replies.