Jump to content
 
 

Sign in to follow this  
meade916

Polaris RZR-4 900 Turbo - Sound system and Mods - Update: New Seats!! Rockford Fosgate I-Beam Bracket Fabbed Pg. 30

Recommended Posts

AToday, after building the bus bars for the DGAF Tercel project, i was ready to head home. I grabbed a drink of water and looked to the left at the new RZR i just bought 3 days ago..... and to the right at the new System of the Month prize that just came in (Rockford Fosgate T400.4ad and RFT500.1br). I couldn't help it!! i decided to snatch them up. Don't worry, I already have the exact same stuff on the way and hopefully should be here by Monday :D

Anyway, these things have such a small foot print i couldn't resist just "seeing" where i could put them...well seeing turned into doing.

I plan on one set of RF T3's in the kick panels and 2 Rockford P2 10's in a bandpass box aiming forward. I realize it won't slam super hard being outside but it should slam hard enough AND sound good. I plan on making the box somehow part of the back so i still have some sort of bed. Like the box will drop into the bed and still look like there is a bed. I will probably bedline it. Also, before you ask, the placement on the amps that i chose has a chance to be exposed to the elements. I am getting the roof soon, so the sun won't bake on them. I will end up making a cover for days when i have to hose out the inside. I fully understand the amps might get dirt or a little mud on them over the years. Not worried about it. I should have it all playing by tomorrow with the exception of the box being done or the kick pods being built. I will run all the wires and have it all prepped for the box, woofers and mids/highs. More pics to come of course! Here it is so far.


the plan:

1 Apple Ipad Mini (future)
1 Rockford Fosgate 3sixty.3 Processor (with bluetooth)
1 Rockford Fosgate T500.1br (powering the subs)
1 Rockford Fosgate T400.4ad (powering mids/tweets)
1 Set Rockford Fosgate T3 Separates (future, subject to change).
2 Rockford Fosgate Punch P2 10" Subwoofers (future, subject to change).
SMD D'Amore Engineering RCA Cables
SMD TM-1 Temperature Monitor
SMD VM-1 Volt Meter
SMD OM-1 Output Meter
1 XS Power D925 AGM Battery
2 XS Power D975 AGM Batteries
Sky High Fusing
Custom Amp Cover with built in fans (future, subject to change)

rf1_zpsede2aaf7.jpg


rf2_zps696cd1a7.jpg


IMG_1585_zpsc7946597.jpg



IMG_1586_zps17963a0c.jpg



IMG_1587_zpsd33d1abe.jpg



IMG_1588_zps94d56f47.jpg



IMG_1589_zps74a87f7b.jpg



IMG_1590_zpsa0c7e304.jpg



IMG_1591_zps5a1d0b7b.jpg



IMG_1592_zpsfb253bd9.jpg


IMG_1593_zps77242ff8.jpg

  • Like (+1 Rep) 2



Webp.net-gifmaker_7_.gif

Subscribe to My Youtube Channel!
http://www.youtube.com/meade916

The Official SMD Facebook Page
http://www.facebook.com/pages/SMD-Steve-Meade-Designs-OFFICIAL-Fan-Page/207890963429

Follow my Tweet (Twiiter)
http://www.Twitter.com/meade916

My Instagram
http://www.instagram.com/meade916

Highest OFFICIAL SPL scores (at shows, on the TermLab)

DBDRAG - 156.5

Usaci - 157.4

Usaci Streetbeat - 155.2

 

 

Share this post


Link to post
Share on other sites

IMG_1594_zps139aab34.jpg

IMG_1595_zps1eb53aef.jpg

IMG_1596_zps585e7808.jpg

IMG_1597_zps93365547.jpg

IMG_1598_zpsd1362870.jpg

IMG_1599_zpsbdcdd2b5.jpg

IMG_1600_zps53fae86c.jpg

IMG_1601_zpsec95eee2.jpg

IMG_1602_zps881f01b4.jpg




Webp.net-gifmaker_7_.gif

Subscribe to My Youtube Channel!
http://www.youtube.com/meade916

The Official SMD Facebook Page
http://www.facebook.com/pages/SMD-Steve-Meade-Designs-OFFICIAL-Fan-Page/207890963429

Follow my Tweet (Twiiter)
http://www.Twitter.com/meade916

My Instagram
http://www.instagram.com/meade916

Highest OFFICIAL SPL scores (at shows, on the TermLab)

DBDRAG - 156.5

Usaci - 157.4

Usaci Streetbeat - 155.2

 

 

Share this post


Link to post
Share on other sites

Hella clean. Those amps are dope too! Great prizes for SOTM!


Thanks alaskanzx5 I might just do that
I can recone a sub myself. About a year ago I took 2 12" power acoustic mofos and made one sub. I took the magnet and the motor off of one and j b welded it to the other motor and magnet. I had to wind my own voice coil so it would work. After I was done hooked up to 2 boss 5000w amps. And shattered my back and all my side windows

came to this thread to recommend soundqubed and ct sounds. OP goes with soundstream.

oh lawd.

Share this post


Link to post
Share on other sites

there is a nice spot under the passenger seat but i didn't like the thought of the amps down there.....i wanted them up off of the floor because if anything is going to get wet it's that.




Webp.net-gifmaker_7_.gif

Subscribe to My Youtube Channel!
http://www.youtube.com/meade916

The Official SMD Facebook Page
http://www.facebook.com/pages/SMD-Steve-Meade-Designs-OFFICIAL-Fan-Page/207890963429

Follow my Tweet (Twiiter)
http://www.Twitter.com/meade916

My Instagram
http://www.instagram.com/meade916

Highest OFFICIAL SPL scores (at shows, on the TermLab)

DBDRAG - 156.5

Usaci - 157.4

Usaci Streetbeat - 155.2

 

 

Share this post


Link to post
Share on other sites

Ohh shit.. I like where this is going Mr. Meade.

The fact that you're active processing a setup in an ATV puts a smile to my face. This once again proves that the benefits aren't only apparent in a purely SQ oriented setup :clapping:

Once again, another build ill be following..

  • Like (+1 Rep) 1

On 5/8/2011 at 7:38 PM, Kranny said:
On 5/8/2011 at 7:35 PM, 'Maxim' said:

It hurts me inside when I read stuff like this and remember you're 15

LMFAO so true

:blush:

Mitsubishi 3000GT (Old Build)

Headunit: Pioneer 80PRS

Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids

Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies

Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s

Electrical :Singer 260A Alt & JY Power Lithium

 

2005 Chevy Colorado Ext Cab

Headunit: Pioneer 80PRS

Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms

Substage (In Progress): 4th Order 6 18" Walkthrough

Electrical: Singer "390" and JY Power

My Official Feedback Thread

Share this post


Link to post
Share on other sites

put the amps on the dyno so we can see what kind of power they make....

  • Like (+1 Rep) 4

80prs

Arc Audio Xdi 1200.6 (using active crossovers) Freaking awesome amplifier

Incriminator IA 10.1

Focal PS 130v 5.25 (doors)

4" Faital pro Neo (kick panels) 

3" Faital pro Neo and focal tweets( dash)

DC Audio level 3 12"  custom box designed by joex built by me

AGM front, XS 750SE batteries rear

DC 180 alt

99 Toyota Tacoma extra cab

http://www.stevemeadedesigns.com/board/topic/179476-my-small-build-turned-into-the-ongoing-build/

Share this post


Link to post
Share on other sites

I knew you were going to put something in the RZR just wasn't sure when lol.

As always the placement and installation looks super clean. Jeez those amps are tiny.

Share this post


Link to post
Share on other sites

Thats sickkk!


33y2914.jpg

Team Subsonic Lows


Get your garbage EMF products of my amp bitch


Man....it makes a nice work bench ;)

Share this post


Link to post
Share on other sites

put the amps on the dyno so we can see what kind of power they make....

nahh no time for that.

every Rockford amp i ever tested exceeded it's ratings so i am not sweating it.




Webp.net-gifmaker_7_.gif

Subscribe to My Youtube Channel!
http://www.youtube.com/meade916

The Official SMD Facebook Page
http://www.facebook.com/pages/SMD-Steve-Meade-Designs-OFFICIAL-Fan-Page/207890963429

Follow my Tweet (Twiiter)
http://www.Twitter.com/meade916

My Instagram
http://www.instagram.com/meade916

Highest OFFICIAL SPL scores (at shows, on the TermLab)

DBDRAG - 156.5

Usaci - 157.4

Usaci Streetbeat - 155.2

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...

SMD Chat Room

SMD Chat Room

Please enter your display name