Sergeant_Skyrim Posted May 15, 2014 Author Report Share Posted May 15, 2014 Appreciate it! I ended up running out of resin the other day so I haven't gotten the glassing of the wall completed yet like I had hoped, and I'm still not back to Tampa yet so don't have some of the pics I wanted. But here are a few of some of the wall work so far. Decided to start from the back of the back seat, with the thinking that I'd build as far forward as I needed to: Double layered back piece: Secured it into place with metal 90s, ended up leaning forward slightly by the end but not by much: After that came the angled sides. I ended up using the same angles for each side to simplify things, and they met up at the edge of the 'floor': Everything put into place with 90s and glued and screwed together: Build in progress Link to comment Share on other sites More sharing options...
thefourth Posted May 15, 2014 Report Share Posted May 15, 2014 This should be interesting. Thanks alaskanzx5 I might just do thatI can recone a sub myself. About a year ago I took 2 12" power acoustic mofos and made one sub. I took the magnet and the motor off of one and j b welded it to the other motor and magnet. I had to wind my own voice coil so it would work. After I was done hooked up to 2 boss 5000w amps. And shattered my back and all my side windows came to this thread to recommend soundqubed and ct sounds. OP goes with soundstream. oh lawd. Link to comment Share on other sites More sharing options...
im45pl Posted May 15, 2014 Report Share Posted May 15, 2014 work looks nice mate... nice subs too. tuned in for this one TEAM DC AUSTRALIA My_Build_Log Link to comment Share on other sites More sharing options...
im45pl Posted May 15, 2014 Report Share Posted May 15, 2014 work looks nice mate... nice subs too. tuned in for this one TEAM DC AUSTRALIA My_Build_Log Link to comment Share on other sites More sharing options...
Sergeant_Skyrim Posted May 15, 2014 Author Report Share Posted May 15, 2014 This should be interesting. That's what I'm aiming for! work looks nice mate... nice subs too. tuned in for this one Thanks man! Great minds must think alike haha A few more pics, I decided to go with the top piece next which is double layered like everything else: The reason I did the top starting from the center was because I originally planned to do angled pieces again to maximize airspace, however the angles weren't the same from front to back as I had hoped. Decided next would be the inner baffle below: Build in progress Link to comment Share on other sites More sharing options...
zack_e89 Posted May 15, 2014 Report Share Posted May 15, 2014 Looking great dude! We both have 2 lvl 6's, you're going to love them.... How many cubes are you trying/going to end up with? 97 Suburban 8 custom PSI Platform 3 18's Link to comment Share on other sites More sharing options...
jdshott Posted May 15, 2014 Report Share Posted May 15, 2014 Nice ! im tunned in for this . No 1 But me paid for this stuff and NO FREEBIES so no brand names (No Free Advertisement ) A SQ head unit 6 5.25 2 X 6x9s 7804 P400.4 4001D 1 34s (Maybe time to change brand) 4 X 15" s !/0 @ 2/0 OFC Wiring :morepower1: :morepower1: ill say it like i always say it. F##K the DD-1. I don't care if you or anyone buys one. (well i do, but that isn't my point) Get an O-scope in the very minimum and learn how to use it or you are just guessing your settings like every other noob. once you master the O-scope then step up to a DD-1 or even better a DD-1 Plus. Link to comment Share on other sites More sharing options...
Sergeant_Skyrim Posted May 15, 2014 Author Report Share Posted May 15, 2014 Looking great dude! We both have 2 lvl 6's, you're going to love them.... How many cubes are you trying/going to end up with? The wall itself is put together for the most part, minus the flush mount baffle. Ended up with 16 cubes of usable space inside before sub and port displacement. Pretty excited about that because I can always shrink if necessary as opposed to trying to find more volume Nice ! im tunned in for this . You and me both! Working on putting the last two batteries and 9k in so that I can try playing around with tuning it and all Build in progress Link to comment Share on other sites More sharing options...
pioneerforlife Posted May 15, 2014 Report Share Posted May 15, 2014 I like it man. Tuned in. 2007 Ford Focus SES Hatchback Pioneer HU 4 Digital Designs 9515i's in a B pillar. 2 Soundstream XXX 15K's (running at 16 volts) Soundstream Mids/Highs in custom door panels (getting rebuilt soon) Soundstream TA2.160 and TA2.400 Sky High and KNU wiring 3 Banks of Maxwell caps Winston Lithium (not a fan) Bump4Life 250 Amp Alt. aka USAlternators Soundstream Focus and Avenger Build Log Instagram @p4linnovation YouTube: Team Blowin Loud Link to comment Share on other sites More sharing options...
b-eazy Posted May 16, 2014 Report Share Posted May 16, 2014 I'm tuned in for sure Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.