CstrokerV Posted June 2, 2014 Report Share Posted June 2, 2014 so i plasti dipped my tailgate and i want to do the bottom half of my car .. my only concern is when i pull the painters tape will the plasti dip separate at the tape or will it stay on it and start peeling all of it when i pull it? Any one know? my build http://www.stevemeadedesigns.com/board/topic/142505-small-build-log-4-dc-lvl3-10s-tl-update-link-to-rebuild/ http://www.stevemeadedesigns.com/board/topic/154258-rebuild-6-lvl3-12s-update-small-video-nothing-spectacular/ new build http://www.stevemeadedesigns.com/board/topic/188181-03-trailblazer-slow-build-8-dc-lvl3-12-m1-motor-m2-parts/ Link to comment Share on other sites More sharing options...
BLuejoules Posted June 2, 2014 Report Share Posted June 2, 2014 You have to pull the tape off while the last coat is still wet. IG: devinthydude Link to comment Share on other sites More sharing options...
Marquisboys Posted June 2, 2014 Report Share Posted June 2, 2014 I plasti dipped my rear fascia of my car and i used masking tape for the places i didnt want paint to get on. Plasti dip worked good but do not let that paint dry and try pull the masking tape off as plasti dip will peal with the tape. You have to pull the tape right after you apply the paint. SOOO frustrating when you need to do multiple coats. If you try doing multiple coats without it drying first it looks like poo run marks will start as the paint is to wet and thick. And if the paint dries the paint will come off with the tape 2004 Grand MarquisAA Mayhem 18Crescendo 3500d6.5's AQ Pro AudioAQ Super TweetsImage Dynamics 6x9Soundqubed 125.4MB Quart 80.4144.2 db GONZO 2013 Chrysler 300S Granite Crystal Metallic Exterior Inferno Red Interior 5.7 HEMI AWD LMI Air Hammer Intake Corsa exhaust Custom Tune Link to comment Share on other sites More sharing options...
CstrokerV Posted June 2, 2014 Author Report Share Posted June 2, 2014 video was kinda helpful.. But im using a rattle can and it says to let dry 4 hours between coats i guess ill experiment the black in only 6 bucks a can my build http://www.stevemeadedesigns.com/board/topic/142505-small-build-log-4-dc-lvl3-10s-tl-update-link-to-rebuild/ http://www.stevemeadedesigns.com/board/topic/154258-rebuild-6-lvl3-12s-update-small-video-nothing-spectacular/ new build http://www.stevemeadedesigns.com/board/topic/188181-03-trailblazer-slow-build-8-dc-lvl3-12-m1-motor-m2-parts/ Link to comment Share on other sites More sharing options...
IH8PunkRok Posted June 2, 2014 Report Share Posted June 2, 2014 do your first coat. it should be fairly light. no need to go heavy yet. Let it dry for ten minutes. repeat. try to leave the area close to the tape less covered on your last coat do a full coverage making sure the tape area is completely coated. immediately after spraying begin to peel the tape. be careful to not let your tape hit the freshly dipped area I've done this many times and it works well -Matt2005 Dodge Magnum RTJVC KD-AVX1 2 PPI S580.2 Obsidian Audio ST1 Horn Tweeters PRV 8MB450s Audio Legion 3500.1D 2 RE MT 18s 360 ah LiFePO4 BatterySHCA 2/0 155.2 @ 29 hzKicker CVR 15's buildDD 3512e buildMini T-Line Build(6) 8s BuildNightshade 15s Wall BuildMagnum AB XFL 12s BuildNewest Magnum Build Link to comment Share on other sites More sharing options...
CstrokerV Posted June 2, 2014 Author Report Share Posted June 2, 2014 alright thanks a lot next sunny day ill give it a go my build http://www.stevemeadedesigns.com/board/topic/142505-small-build-log-4-dc-lvl3-10s-tl-update-link-to-rebuild/ http://www.stevemeadedesigns.com/board/topic/154258-rebuild-6-lvl3-12s-update-small-video-nothing-spectacular/ new build http://www.stevemeadedesigns.com/board/topic/188181-03-trailblazer-slow-build-8-dc-lvl3-12-m1-motor-m2-parts/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.