pimpedout97x Posted March 26, 2008 Report Share Posted March 26, 2008 for those of you that didnt see in the other thread, i took the first one out. i really wasn't happy with it once i thought about it. this one, already with the false floor, is coming out alot better. the floor is 2 layers thick. the first layer is bolted with 1/2" x 2.5" bolts in the rear, and up front its tite bonded, and screwed to those 2x4's u see under there. the 2x4's themselves are also bolted to the body with the same bolts. none-the-less, its very sturdy, and not gonna budge. the 2nd layer is self explanatory, its to make is 100% level (to cover the bolt heads used to bolt the first layer down) and to clarify, the cuts i made on the rear cross-member, to get those bolts in (still cant believe i did that) will be getting welded shut by my body shop soon. just wanna throw that out there, becuase i know someones gonna comment on the pic that shows those cuts lol... anyways, pics- btw- i havent decided on subs yet. or the exact style of box. im 95% set on doing a ported clam shell, i just gotta see how much space im working with. Link to comment Share on other sites More sharing options...
soundmekanixdan Posted March 26, 2008 Report Share Posted March 26, 2008 cant wait to see how this turns out! lookin good so far! Sound Mekanix - Dan Team Fi Team Kinetik Team Sundown Ascendant Audio Sound Mekanix SPL Design Team Link to comment Share on other sites More sharing options...
Clif Posted March 26, 2008 Report Share Posted March 26, 2008 this is going to be noice! keep us posted havent seen to much in a mini before! 03 Trailblazer EXT LT In Dash Rear Flip Down Polk Audio Font & Rear Stage Hifonics Zeus 4 Chan Amp Hifonics Brutus Mono Amp 12" Rockford Fosgate Power HX2 T-Line tuned to 45hz 18"BTL T-line @31Hz (9 weeks pregnant) Link to comment Share on other sites More sharing options...
BFB Posted March 26, 2008 Report Share Posted March 26, 2008 Sorry the first wall didn't work out, I'll be following along with this build too. Link to comment Share on other sites More sharing options...
pimpedout97x Posted March 26, 2008 Author Report Share Posted March 26, 2008 it did, i just didnt like how i built it. Link to comment Share on other sites More sharing options...
BFB Posted March 26, 2008 Report Share Posted March 26, 2008 it did, i just didnt like how i built it. I know the feeling... Got a few shows to go to over the next month or two, then I'll be starting over, again. Link to comment Share on other sites More sharing options...
Scrubbalo Posted March 26, 2008 Report Share Posted March 26, 2008 Looking good man can't wait to see this one finished up. Sundown SAZ-3000 2 12" T3 DVC1ohm subs 58hz peak cabin frequency no deadner yet box tuned to 38hz BIG 3 upgrade yamaha patio speakers rear fill Alpine 9833 deck PPI FRX-456 Crossover PPI PAR-245 Preamp/EQ PPI DEQ-30 Band EQ fronts PPI tweets in kick panel PPI 2-way's in kicks for now 0/GA 1 run front to back Memphis 4 channel running rear speakers 75 X 4 only 2 channels used for now Planet Audio 4 channel 75 X 4 running front speakers 146.7 db usaci drivers door open 163.3 db port challenge mic in port 2012 4door silverado Link to comment Share on other sites More sharing options...
Slinky Posted March 26, 2008 Report Share Posted March 26, 2008 good luck on the build and take your time DD M4 Rockford Fosgate P500-4 SoundQubed HDC415 w carbon fiber cap 2 Rockford Fosagate T1675-S XS Power D3400 Under Hood XS Power D5100 in rear Michael Singer 200A Alt Build Log: http://www.stevemeadedesigns.com/board/topic/153901-2012-veloster-update-842013-wall-build-4-15s/ Link to comment Share on other sites More sharing options...
pimpedout97x Posted March 27, 2008 Author Report Share Posted March 27, 2008 i will for sure Link to comment Share on other sites More sharing options...
pimpedout97x Posted March 27, 2008 Author Report Share Posted March 27, 2008 cut out the bottom piece of the box. i need to get more Birch. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.