sundownz Posted November 11, 2014 Author Report Posted November 11, 2014 I measured a production v.2 and a newly re-built v.3 with the final compliance side-to-side with the same amount of play time (neither is fully broken-in). Just to compare... looks like we nailed the stiffness based on FS... and we see a drop in Qts due to the higher BL (also higher sensitivity) : BL^2/RE = 70.17 BL^2/RE = 85.78 ----- I don't trust the Woofer Tester as an "end all be all" of spec measurement either so don't read too far into it... but comparing on the same day back-to-back I can tell if my design goals are being met The spec on our web-site for the SA-8 v.2 was done with a Klippel machine after full break-in for reference. 1 Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
Mtnbikecrazy55 Posted November 11, 2014 Report Posted November 11, 2014 Nice! When is the new sd-8 coming out? Quote I hate long signatures.... ...what the fuck is wrong wiht you you fucking fuckity fuck fuck head... Mtnbikecrazy55 Feedback
sundownz Posted November 11, 2014 Author Report Posted November 11, 2014 Nice! When is the new sd-8 coming out? I concentrated most on the SD-3 10" model; which is now complete and about to start production. I will likely do the 12" next; then the 8" last since it is changing the least in it's revision to SD-3 I don't have an ETA for it yet, though, as I still need to go through all of the development and tooling. Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
Mikhail Felton Posted December 17, 2014 Report Posted December 17, 2014 Nice.. So im guessing yall give up on the x-8? Quote Vehicle: 2005 Kia Sorrento Ex Head Unit: Samsung Galaxy Note 10.1 Mids & Highs: Motorola KSN-1005s & Alpine SPR-17C Type R 6.5s Speaker Amp: Sony XM-ZR1252 Sub Amplifier: Pure Audio 3000.1 Subwoofer: Incriminator Audio Death Penalty 21"
sundownz Posted December 17, 2014 Author Report Posted December 17, 2014 Nice.. So im guessing yall give up on the x-8? Nope. I have more on the way that should have all of the bugs worked out 1 Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
gmoxley1 Posted December 17, 2014 Report Posted December 17, 2014 Nice.. So im guessing yall give up on the x-8?Nope. I have more on the way that should have all of the bugs worked out Whoo! Quote 1998 chevy blazer 4 door stock alt 105a Battery: Autocraft Gold 75-3 Big Three in Sky High Car Audio 4ga subs: rockford p2 12's (soon to be sundown SA 12's) Sundown SAZ-1200d on the subs Mids and Highs: Infinity kappa 6.5 mid in front doors and tweets in Dash sae 50.4 for mids and highs SMD OM-1 on the subs
Mikhail Felton Posted December 18, 2014 Report Posted December 18, 2014 Nice.. So im guessing yall give up on the x-8? Nope. I have more on the way that should have all of the bugs worked out I have a question.. the X subs are getting a spl spider upgrade soon.. will this included the x8 also? Quote Vehicle: 2005 Kia Sorrento Ex Head Unit: Samsung Galaxy Note 10.1 Mids & Highs: Motorola KSN-1005s & Alpine SPR-17C Type R 6.5s Speaker Amp: Sony XM-ZR1252 Sub Amplifier: Pure Audio 3000.1 Subwoofer: Incriminator Audio Death Penalty 21"
dharris2488 Posted December 18, 2014 Report Posted December 18, 2014 Well, I know what my next set of 8's are going to be... Quote 2013 Toyota Camry SE 240a MechMan HO Alternator 1/0 Welding Flex Cable Big 3 CT Sounds 4000.1D Kenwood XR400-4 Mid/High Amp SoundQubed Q4-120 Mid Amp Infinity Kappa 6.5 components Kappa 6x9's for rear deck fill (coming out) (4) 8" PRV 8MB450's Set of SoundQubed SuperTweets (2) DSS Ethos 12's D2's @32.5hz (building 4th order enclosure) (2) SQ HDC3 10's @ 33.5hz (current build, loving them) Pioneer AVH-X4600BT 100 sq/ft Stinger RoadKill Sound Deadner 120 sq/ft QMat Sound Deadener (4) Juice Box Black Cherries Lots and Lots of feet of SHCA wire, along with 50' of Welding 1/0 2 Runs of 1/0 Positive front to back ToolMaker Everywhere
sundownz Posted December 18, 2014 Author Report Posted December 18, 2014 Nice.. So im guessing yall give up on the x-8? Nope. I have more on the way that should have all of the bugs worked out I have a question.. the X subs are getting a spl spider upgrade soon.. will this included the x8 also? The X-8 standard spider is more of an "SPL" type geometry. We could stack more together for your on a drop-in, though. Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
Ajthasavage Posted March 14, 2015 Report Posted March 14, 2015 Hey I had preordered 4 of these sa 8 and was wondering if they were close to being released. I had read already that you were planning for late march I believe but was wondering if everything is still in order or if there were any set backs? Definitely stoked to receive these bad boys! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.