Kyblack76 Posted November 15, 2014 Report Share Posted November 15, 2014 I don't think he's using the amps as master and slave. In which case you would set both with the dd-1. im just saying MASTER and SLAVE as the ONE you set, and the one you MIRROR using the CC1 No linking no strapping Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
OrionStang Posted November 15, 2014 Report Share Posted November 15, 2014 I don't think he's using the amps as master and slave. In which case you would set both with the dd-1. im just saying MASTER and SLAVE as the ONE you set, and the one you MIRROR using the CC1 No linking no strapping Gotcha. Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
Kyblack76 Posted November 15, 2014 Report Share Posted November 15, 2014 you know what? start watching around 300 or so Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Kyblack76 Posted November 15, 2014 Report Share Posted November 15, 2014 see you do NOT turn up to full. just get a signal....green.. thats all FROM the master or the one you CHOOSE to MIRROR Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
MatthewBigBossWilliams Posted November 15, 2014 Author Report Share Posted November 15, 2014 Ok I have done all this before. And the as soon as I touch main amp, it says bad signal. Quote Link to comment Share on other sites More sharing options...
Kyblack76 Posted November 15, 2014 Report Share Posted November 15, 2014 Ok I have done all this before. And the as soon as I touch main amp, it says bad signal. so the master says WHAT? bad signal on the dd1 or cc1 ? Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
audiofanaticz Posted November 15, 2014 Report Share Posted November 15, 2014 Try swapping your master and slave around. I know when I just gain matched both my 4500s a couple days ago I used the DD-1+ to set BOTH amps, then I came back with the CC-1 and checked each amp. 1 of my amps makes about 5 more volts of power when set witth my dd-1+, So if i use the cc-1 to match off my louder amp, it instantly pushes my slave into clipping. Quote Link to comment Share on other sites More sharing options...
MatthewBigBossWilliams Posted November 15, 2014 Author Report Share Posted November 15, 2014 Ok I have done all this before. And the as soon as I touch main amp, it says bad signal. so the master says WHAT? bad signal on the dd1 or cc1 ? Bad signal on the CC-1 Quote Link to comment Share on other sites More sharing options...
MatthewBigBossWilliams Posted November 15, 2014 Author Report Share Posted November 15, 2014 Try swapping your master and slave around. I know when I just gain matched both my 4500s a couple days ago I used the DD-1+ to set BOTH amps, then I came back with the CC-1 and checked each amp. 1 of my amps makes about 5 more volts of power when set witth my dd-1+, So if i use the cc-1 to match off my louder amp, it instantly pushes my slave into clipping. Alright I will take that idea also Quote Link to comment Share on other sites More sharing options...
audiofanaticz Posted November 16, 2014 Report Share Posted November 16, 2014 Just want to make sure you have a good battery in the device like a Duracell, Rayovac, or Energizer, something decent and that it has decent amount of juice left in it right? I dont know how many times this has happened and you ask the person and they say its a brand new Duracell in the device. Then when they return the item because it does not work and Steve or Tony get the item back as a return or repair they check the battery first and its usually some dead battery reading 4 volts or some no name generic battery. They simply put a new quality battery in it and the device works just fine. I myself replace my batteries in my DD-1, DD-1+, IM-SG, and CC-1 as well as my 2 clamp meters and my multimeter twice a year even if there is still life left in the batteries. Just making sure this isnt the case here. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.