ISO Posted April 4, 2008 Report Posted April 4, 2008 Steve I have 2 RF 1501BDs unmodded, at the moment I can only use one at a time. Anyhow I run mine with sealed boxes at 2ohm. One day I decided to build a ported box to test out some SPL subs and my only options were 1 ohm and 4 ohm so I ran the 1501BD at 1 ohm with the ported box and becuase of the impedence rise of the box I never went into protect but I sure notice how much more current it was pulling and how much more power it seemed like it was putting out. Well I can't do any quailty wattage test becuase my system is pulling current to fast for me to use a DMM and an amp clamp to get real figures(except at 11 volts maybe) LOL. So when you were running your modded 1501BDs at 1 ohm nominal what kind of power were you seeing? P.S. I can't afford to buy one at the moment but I wanted to know if you still had any modded 1501BDs left? I want to run 3 10s at 1.33 ohms instead of 2 and I don't want to mod the 2 I have. ( I just really love that amp) I am getting ready to recone a set of RF HX2 10s can you recommend a glue for me to use and were to get it from? Thanks for your time. Quote Isobaric - Refers to the practice of coupling two drivers together to make them act as one. "Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go." Insanity: doing the same thing over and over again and expecting different results. The Destruction of a person builds character.
ISO Posted April 5, 2008 Author Report Posted April 5, 2008 Just trying to catch Meade while he might be online. Quote Isobaric - Refers to the practice of coupling two drivers together to make them act as one. "Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go." Insanity: doing the same thing over and over again and expecting different results. The Destruction of a person builds character.
ISO Posted April 5, 2008 Author Report Posted April 5, 2008 Then send a PM I did about 20 minutes ago. Quote Isobaric - Refers to the practice of coupling two drivers together to make them act as one. "Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go." Insanity: doing the same thing over and over again and expecting different results. The Destruction of a person builds character.
Forevrbumpn Posted April 5, 2008 Report Posted April 5, 2008 Iam sure his PMs are almost always full, hard to get ahold of him these days, unless you catch him chatting in thread Quote I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy.
Noobtastic14 Posted April 5, 2008 Report Posted April 5, 2008 (edited) he has replied to my myspace msg before =D made my day (at the time) -Drew Edited April 5, 2008 by Noobtastic14 Quote I am a United States Military Arts and Crafts Professional. Sand it off, Paint it on. uhoh_45 said: dont be a pussy P give the jeep to drew
ISO Posted April 5, 2008 Author Report Posted April 5, 2008 (edited) I tried to PM him I'm pretty sure it actually went though but I didn't think it would, thats why I started a thread. I figured it would take acouple of days before I got an answer from him.(I know he is doesn't have alot of time) But we just got our wires crossed on a forum so I don't know if he will write me back. Edited April 5, 2008 by ISO Quote Isobaric - Refers to the practice of coupling two drivers together to make them act as one. "Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go." Insanity: doing the same thing over and over again and expecting different results. The Destruction of a person builds character.
meade916 Posted April 5, 2008 Report Posted April 5, 2008 im here, i went out to dinner im not 100% sure the actual power......birthsheets ranged from 1650 to 1750 @ 2 ohms and i had them all at .7 (dual .7's, one on each coil). My guess is, in a perfect world they were probably close to 2,000 watts each. as far as glue, use black CA glue or a 2 part epoxy. The CA glue is easier IMO. Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916
ISO Posted April 5, 2008 Author Report Posted April 5, 2008 im here, i went out to dinner im not 100% sure the actual power......birthsheets ranged from 1650 to 1750 @ 2 ohms and i had them all at .7 (dual .7's, one on each coil). My guess is, in a perfect world they were probably close to 2,000 watts each. as far as glue, use black CA glue or a 2 part epoxy. The CA glue is easier IMO. Thanks for gettin back to me Steve. I live Litterly in the middle of no where, is there anyplace on the internet you can recommend to order from, for the CA glue? Thanks Quote Isobaric - Refers to the practice of coupling two drivers together to make them act as one. "Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go." Insanity: doing the same thing over and over again and expecting different results. The Destruction of a person builds character.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.