sundownz Posted March 25, 2015 Report Share Posted March 25, 2015 (edited) Obviously not everyone agrees on what they like -- that being said we sold 1,000 sets of the SA-6.5 CS and 95% or more of people absolutely love them. They do have a smooth sound to them so if you like a sharp sound (think MB Quart, Focal, etc) you may not like them. That being said -- the SA-6.5CS v.2 is in production and due in June. Significantly beefier / lower distortion mid (bigger motor, bigger & longer coil, added shorting ring, etc) & improved tweeter. Crossover is a full 24dB slope unit; very nice. We are also making an SD-6.5CS set which is essentially the original SA-6.5CS set w/ a stamped frame on the mid & improved crossover. Cost is the same as the original SA-6.5CS set & it is also due in June. As far as materials used -- we use the same cone material as some much more expensive products on both the SD & SA components (and SA coaxials that are also coming in June). Motors are FEA optimized & tweeters tweaked to my liking. Edited March 25, 2015 by sundownz 1 Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected] Link to comment Share on other sites More sharing options...
sundownz Posted March 25, 2015 Report Share Posted March 25, 2015 https://www.facebook.com/media/set/?set=a.769511256437681.1073741863.114478905274256&type=3 * SD Component info on Facebook https://www.facebook.com/media/set/?set=a.766705293384944.1073741862.114478905274256&type=3 * SA-6.5CS v.2 info on Facebook https://www.facebook.com/media/set/?set=a.623083881080420.1073741845.114478905274256&type=3 * SA Coaxial info on Facebook 2 Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected] Link to comment Share on other sites More sharing options...
Karkov Posted March 25, 2015 Report Share Posted March 25, 2015 Owner of Sundown comes through once again. Quote 2007 Chevy Tahoe (SOLD) 12 ~ FI Audio X series 10" w/BP option 2 ~ DC Audio 5.0K @0.67 3 ~ DC Audio 5.0K @1.0 2 ~ PPI 3 way sets (not installed yet) 1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4 4 ~ CT Sounds 5.25" Strato comps (rear fill only) 1 ~ XS Power D4800 1 ~ XS Power D3400 8 ~ XS Power XP3000 160 stock alt, Mechman 370 Elite, 185 DC Power 320+ Sq. Ft. Sound Deadener Pioneer AVH-X5500BHS Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0 Link to comment Share on other sites More sharing options...
sundownz Posted March 25, 2015 Report Share Posted March 25, 2015 Obviously not everyone agrees on what they like -- that being said we sold 1,000 sets of the SA-6.5 CS and 95% or more of people absolutely love them. They do have a smooth sound to them so if you like a sharp sound (think MB Quart, Focal, etc) you may not like them. To follow up a bit... out of the 1,000 sets sold I have actually heard from maybe 2-3 people that weren't happy. And one of them is in this thread *laughs* That being said -- I don't expect every person on the planet to always like what I like =) 1 Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected] Link to comment Share on other sites More sharing options...
Smurfboy Posted March 25, 2015 Author Report Share Posted March 25, 2015 Obviously not everyone agrees on what they like -- that being said we sold 1,000 sets of the SA-6.5 CS and 95% or more of people absolutely love them. They do have a smooth sound to them so if you like a sharp sound (think MB Quart, Focal, etc) you may not like them. That being said -- the SA-6.5CS v.2 is in production and due in June. Significantly beefier / lower distortion mid (bigger motor, bigger & longer coil, added shorting ring, etc) & improved tweeter. Crossover is a full 24dB slope unit; very nice. We are also making an SD-6.5CS set which is essentially the original SA-6.5CS set w/ a stamped frame on the mid & improved crossover. Cost is the same as the original SA-6.5CS set & it is also due in June. As far as materials used -- we use the same cone material as some much more expensive products on both the SD & SA components (and SA coaxials that are also coming in June). Motors are FEA optimized & tweeters tweaked to my liking. Thanks for the information! I wasn't aware they're about to come out around summer time. Definitely looking forward to it in the future. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.