Joe X Posted April 16, 2015 Report Posted April 16, 2015 Wire the subs like this: You don't need to to round the parts exactly like shown, just sand the sharp edges as best as you can, and end up a little rounded. Given that you are really starting on this you should have someone to help you....seriously.
raymondterry93 Posted April 16, 2015 Author Report Posted April 16, 2015 we Wire the subs like this: You don't need to to round the parts exactly like shown, just sand the sharp edges as best as you can, and end up a little rounded. Given that you are really starting on this you should have someone to help you....seriously. well the shops around me wont help they rather do it their selves and charge 300 bucks when i can buy two sheets off wood for 48 bucks and cut them my self im not worried about carpet i like the wood grain look in my opinion and i never really open my trunk for people to look inside unless its close friends
Joe X Posted April 16, 2015 Report Posted April 16, 2015 If you don't have a table saw it will be hard to do it on a jigsaw right, I would even prefer to get the wood cut at home depot talking to and tipping the guy doing the job. And right I wouldn't care about the finish at all but you need to come up with a very solid build still.
raymondterry93 Posted April 16, 2015 Author Report Posted April 16, 2015 If you don't have a table saw it will be hard to do it on a jigsaw right, I would even prefer to get the wood cut at home depot talking to and tipping the guy doing the job. And right I wouldn't care about the finish at all but you need to come up with a very solid build still. i just talked to a cabinet shop they said they have a table saw and they will do all the cuts to the very exact inch so i think im going to do that and they will help me put the frame and stuff together
SLYentist Posted April 16, 2015 Report Posted April 16, 2015 harbor freight Cables and wires almost never fail; the terminations do.
boometro Posted April 16, 2015 Report Posted April 16, 2015 4cuft total is too small for those subwoofers. they need atleast 2.5-3cuft per and tuning at 28-32Hz.
ChevyBoy95 Posted April 16, 2015 Report Posted April 16, 2015 4cuft total is too small for those subwoofers. they need atleast 2.5-3cuft per and tuning at 28-32Hz. that is the thing, OP didn't even say what size the woofers are. Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/
raymondterry93 Posted April 17, 2015 Author Report Posted April 17, 2015 Cause in my last post I said they were 12's
Recommended Posts
Archived
This topic is now archived and is closed to further replies.