Cannoy Posted May 10, 2015 Report Posted May 10, 2015 Can you put a slot port in a slanted box? And if you can where do you measure to, to get the length of the port?
gally Posted May 10, 2015 Report Posted May 10, 2015 like this? also torres might help in building boxes like this.. 2010 Chevrolet Cruze Radio --- pioneer mvh-200vbt Front/back --- alpine type s 6.5" Sub Control --- Pac LC1 Sub Amp --- GZPA 1.4K Sub --- GZNW 15XSPL D1 Battery - GZBP 12.2500X
Cannoy Posted May 11, 2015 Author Report Posted May 11, 2015 Like that except for the sub and port on the slanted side.
Mr DeeBeez Posted May 11, 2015 Report Posted May 11, 2015 im pretty sure i saw on a thread on here that that is fine. the port length would be measured halfway up the port on the slanted side, to the end of the port. Fi Team 18's (4) Crossfire 16k Crossfire 400.4 & 800.4 Pioneer AVH-X491bhs 140ah cmax CES 320's (2)
Cannoy Posted May 11, 2015 Author Report Posted May 11, 2015 I read that someone did this and it sounded bad, is this true or did they just design their box bad?
Triticum Agricolam Posted May 11, 2015 Report Posted May 11, 2015 I read that someone did this and it sounded bad, is this true or did they just design their box bad? There are a million reasons why that person's box might have sounded bad. Having a port on the slanted face should be no problem as long you use your brain. "Nothing prevents people from knowing the truth more than the belief they already know it.""Making bass is easy, making music is the hard part."Builds:
Cannoy Posted May 11, 2015 Author Report Posted May 11, 2015 So like Mr Deebeez said, measure from the center of the port?
Joe X Posted May 12, 2015 Report Posted May 12, 2015 For a quick estimate, average the top and bottom depths and use that as a starting spot to measure the effective length of the port.
Cannoy Posted May 12, 2015 Author Report Posted May 12, 2015 For a quick estimate, average the top and bottom depths and use that as a starting spot to measure the effective length of the port. Finding the average of the top and bottom would be the same as measuring from the center.
Joe X Posted May 12, 2015 Report Posted May 12, 2015 For a quick estimate, average the top and bottom depths and use that as a starting spot to measure the effective length of the port. Finding the average of the top and bottom would be the same as measuring from the center. You got it.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.