Moreno93 Posted July 20, 2015 Report Share Posted July 20, 2015 I did some wiring yesterday & the day before, heading back out in a bit to try & figure this out but simply my signal from the rca's inputs on my PRS isn't getting to my 4 channel. It's a ct sounds 60.4. The rca's are kicker twisted & shielded 4 channel rca's. The only thing i can think of is on the 3/4 channel one of the rca's outershield was bent, i unbent it and put it back on. Didn't have much time to diagnose though Any idea's? Also incase it is the rca which Rca's should i be using on the ct sounds amps? single ended or twisted? Link to comment Share on other sites More sharing options...
gckless Posted July 20, 2015 Report Share Posted July 20, 2015 Sounds like you have some hands-on troubleshooting to do. There's not much we can do to help you here. But any RCA will work. "Clipping" is the biggest forum boner now. It's like witchcraft... it automatically explains just about everything people don't understand. My build log: http://www.stevemeadedesigns.com/board/topic/200295-gckless-2011-chevrolet-impala/ High resolution photos: Gilbert Kless Photography Link to comment Share on other sites More sharing options...
Moreno93 Posted July 20, 2015 Author Report Share Posted July 20, 2015 Well i want to get the correct one's i'll be troubleshooting in a few mins based off this video... https://youtu.be/QOagVDZLQnA Link to comment Share on other sites More sharing options...
Moreno93 Posted July 20, 2015 Author Report Share Posted July 20, 2015 It doesn't seem to be the rca's, im also barely getting any sound out of my rear speakers that are on headunit power, like less sound then my phone when all the way up Link to comment Share on other sites More sharing options...
ToNasty Posted July 20, 2015 Report Share Posted July 20, 2015 Had a buddy that had the same problem with the CT 60.4. Ended up being the amp ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
Moreno93 Posted July 20, 2015 Author Report Share Posted July 20, 2015 Kind of worried about that.. Checking the outputs on my headunit if its working then its the amp.. Link to comment Share on other sites More sharing options...
Moreno93 Posted July 20, 2015 Author Report Share Posted July 20, 2015 Output is working for sub out's. But checked voltage at the 4 channel & its saying 4.1v but is on & not in protect mode Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.