ChevyBoy95 Posted October 7, 2015 Report Posted October 7, 2015 I have a Kenwood KDC X595, and it is clip free to 35 or 35 and gives 3.98v of the 4v rating clean with subwoofer setting on 0. Quote Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/
Afficionado Posted October 7, 2015 Report Posted October 7, 2015 You need more powah. :] Probably clipping the subs to death right now. Quote If you have any questions relating to nutrition, lifting, or health in general, feel free to give me a PM and I will give you straight forward advice with no BS involved.
Joe.l Posted October 7, 2015 Author Report Posted October 7, 2015 I new to this stuff but how would more power help..not sure at this point Quote
hoit Posted October 7, 2015 Report Posted October 7, 2015 I'm pretty sure Afficionado was kidding. saz3500 should be more than enough for a pair of x-15s. Get the gains matched to the head unit, and you should be much better!! Quote 2007 Chevy Aveo Ls sedan 2 Sundown Xv2 on scv4k @ .5 ohm 2 pair RE XXX 6.5 components on sax200.4 @ 2 ohm Big Three, Three runs 1/0 power from front to back, 1 ground front to back Two runs ground from rear bank to chassis XS power d3100 upfront, 3 Odyssey 2150s in bank Singer 220 amp alt
Joe.l Posted October 7, 2015 Author Report Posted October 7, 2015 What about using a mtx crossover before the amp. Or is that just something I don't need Quote
ToNasty Posted October 7, 2015 Report Posted October 7, 2015 Not needed Quote ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers
Joe.l Posted October 7, 2015 Author Report Posted October 7, 2015 Looks like I've been doing a lot wrong...is the box ok at least Quote
CleanSierra Posted October 7, 2015 Report Posted October 7, 2015 Umm, no one has a clue if your box is ok. General dimensions don't give any detail about how it's built, port size and area, etc. Need pics Quote Im not the one you want to try to troll. Just a fyi for you.
Joe.l Posted October 7, 2015 Author Report Posted October 7, 2015 Agreed to set gains correctly as all have said. In addition, i'd try turning your subsonic filter down...assuming you have a decent box for those subs, you probably have no need to run the subsonic at all. What would be considered off on the subsonic Quote
Joe.l Posted October 7, 2015 Author Report Posted October 7, 2015 <a href="http://s651.photobucket.com/user/thatgooch/media/Mobile%20Uploads/image_zpscaiddnmz.jpeg.html" target="_blank"><img src="http://i651.photobucket.com/albums/uu240/thatgooch/Mobile%20Uploads/image_zpscaiddnmz.jpeg" border="0" alt=" photo image_zpscaiddnmz.jpeg"/></a> I hope I did this ok..port is 6.5 inches wide 21 inches in depth and 16 inches tall Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.