Kyblack76 Posted January 12, 2016 Author Report Share Posted January 12, 2016 is the Turd SX playing yet???? I think we have the box design figured. Build it somewhat inside some outside. Baffle will be able to move. Use the damone imsg, and figure out where we want the baffle to land, and tuned at what we want. Speaking of that. If the baffle is shoved back, will the area where the seats folds down act like a vent? SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
yurvalentine Posted January 12, 2016 Report Share Posted January 12, 2016 Lol, looks a little close. You clowns should have seen us taking that damn alt in and out about half a dozen times to get the nut on there. Link to comment Share on other sites More sharing options...
Kyblack76 Posted January 12, 2016 Author Report Share Posted January 12, 2016 Lol, looks a little close. You clowns should have seen us taking that damn alt in and out about half a dozen times to get the nut on there. Ya. Lol. Make sure you have all connections/eyelets on. Because if you forget the sense wire, or what not, your loosening up everything to get the room to get the nut off. (Did I just say that?) Anyone that is doing trunk work, with the baffle shoved back, have some time to answer some questions? Will the opening where the seats fold, act like a band pass? SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
CortezDTV Posted January 12, 2016 Report Share Posted January 12, 2016 Are you doing 150s yet SCSB Santa Cruz Speaker Box Build logs: Daily Driver Lemon Marquis 2 american bass 750.1s 350.4 on 14 focal 6.5s sq 945 on 4 hertz tweeters Mystery subs http://www.stevemead...__fromsearch__1 The Mustang 'dubbed' Shirley the project from bullet holes to badass http://www.stevemead...cond-skin-time/ Link to comment Share on other sites More sharing options...
Kyblack76 Posted January 12, 2016 Author Report Share Posted January 12, 2016 Damn that's close. What's it charge at when v-tec kicks in? I didn't have my clamp. Voltage is fine. But it does bog down at hot idle. My idle revs are around 550-650. I'm sure it's hardly turning on with the heat on high, at a light. Thank god for these hair pins SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Kyblack76 Posted January 12, 2016 Author Report Share Posted January 12, 2016 Are you doing 150s yet Be honest. You think I can? Staying in the 30hz range??? I'm hopping I can do mid/upper 40's for 30s average. This is no burp want. What are your thoughts? SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
ToNasty Posted January 12, 2016 Report Share Posted January 12, 2016 My thoughts are shut the fuck up and get going ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
Kyblack76 Posted January 12, 2016 Author Report Share Posted January 12, 2016 My thoughts are shut the fuck up and get going Not asking your thinks/thoughts. I'm asking those that are loud. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
ToNasty Posted January 12, 2016 Report Share Posted January 12, 2016 I'll never be loud ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
CortezDTV Posted January 12, 2016 Report Share Posted January 12, 2016 Lol, looks a little close. You clowns should have seen us taking that damn alt in and out about half a dozen times to get the nut on there. Ya. Lol. Make sure you have all connections/eyelets on. Because if you forget the sense wire, or what not, your loosening up everything to get the room to get the nut off. (Did I just say that?) Anyone that is doing trunk work, with the baffle shoved back, have some time to answer some questions? Will the opening where the seats fold, act like a band pass? And yes it acts like a bandpass id measure the hole and opening lol Thats why 4th orders dont work in trunks unless its completely sealed off and seperated SCSB Santa Cruz Speaker Box Build logs: Daily Driver Lemon Marquis 2 american bass 750.1s 350.4 on 14 focal 6.5s sq 945 on 4 hertz tweeters Mystery subs http://www.stevemead...__fromsearch__1 The Mustang 'dubbed' Shirley the project from bullet holes to badass http://www.stevemead...cond-skin-time/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.