SCATHED Posted March 8, 2016 Report Posted March 8, 2016 Just as the title says. Has anyone ran a DC level 3 12" in 1.25 cubes net? Seems small for a 12" sub but that's what DC recommends for them Quote
CstrokerV Posted March 8, 2016 Report Posted March 8, 2016 i ran mine each 1.5 .. and this build if i ever finish might be the 1.25 not sure yet might keep it at 1.5 if i can Quote my build http://www.stevemeadedesigns.com/board/topic/142505-small-build-log-4-dc-lvl3-10s-tl-update-link-to-rebuild/ http://www.stevemeadedesigns.com/board/topic/154258-rebuild-6-lvl3-12s-update-small-video-nothing-spectacular/ new build http://www.stevemeadedesigns.com/board/topic/188181-03-trailblazer-slow-build-8-dc-lvl3-12-m1-motor-m2-parts/
MrSkippyJ Posted March 8, 2016 Report Posted March 8, 2016 If that's what they recommend then it should work. What's your plan for the port? Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
SCATHED Posted March 8, 2016 Author Report Posted March 8, 2016 I'll be running two of these subs so either a single 6" aero, two 4" aeros, or a slot port Quote
MrSkippyJ Posted March 8, 2016 Report Posted March 8, 2016 I'm not great at ports but that seems a little low for port area. Hopefully someone that knows their stuff can help out a bit more. I had 2 lvl 4 12s with a single 8" aero and it wasn't nearly enough. Different subs I know, but still. Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
walwalka Posted March 8, 2016 Report Posted March 8, 2016 2 6in aeros seems to be the sweet spot. Quote 2010 Honda Civic LX / Deck: Kenwood DDX371 / Front Highs: Crescendo RTS-1 / Front Mids: Silver Flute 6.5's / 4 channel: DC Audio 90.4 / Sub: Fi 15in SP4v2 / Sub amp: Taramps HD 5000 / Power wire: Knukonceptz OFC 1/0 / Deadener: Audio Technix 60 mil / Batteries: XS Power D5100R / Rear bank: TBD / Alternator: Singer 240a hairpin
SCATHED Posted March 8, 2016 Author Report Posted March 8, 2016 I usually try to stay between 9 and 12 inches per square foot with aero ports. Do these subs require more port area? Quote
walwalka Posted March 8, 2016 Report Posted March 8, 2016 (edited) I run two 4in for a single FI SSD 12 right now. It loves it. Edited March 8, 2016 by walwalka Quote 2010 Honda Civic LX / Deck: Kenwood DDX371 / Front Highs: Crescendo RTS-1 / Front Mids: Silver Flute 6.5's / 4 channel: DC Audio 90.4 / Sub: Fi 15in SP4v2 / Sub amp: Taramps HD 5000 / Power wire: Knukonceptz OFC 1/0 / Deadener: Audio Technix 60 mil / Batteries: XS Power D5100R / Rear bank: TBD / Alternator: Singer 240a hairpin
MrSkippyJ Posted March 8, 2016 Report Posted March 8, 2016 like I said I'm not the person to offer much in the advice of port design, but I'm pretty sure you can't just use a per square foot formula to figure out port area. That seems to ignore lots of variables. Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
SCATHED Posted March 8, 2016 Author Report Posted March 8, 2016 Well let's stick to the topic at hand. Who has ran a level 3 in 1.25 cubes? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.