Ken Gonzales Posted April 18, 2016 Report Share Posted April 18, 2016 I recently purchased a Sundown Audio X 15 D2 paired with a scv-1500d.Ihave never built a box before so I had a local shop build one for me. To my understanding this speaker preforms best in a box tuned to 32hz. I told the shop that I need this built to this frequency but I believe they did not. They built a slot port box, 33.5x20.75x16.5 with a 15.5x23x4 port, with 1 inch wood. After calculating this on numerous box calculators I come up with around 40 Hz. I'm interested in knowing if these calculations are correct and if so what, if possible what the correct dimensions should be with this box. The 33.5 and 16.5 are maxed out on my trunk space but it could've been built up to 8 inches longer. Thank you for any of your help. Link to comment Share on other sites More sharing options...
BassNewb Posted April 18, 2016 Report Share Posted April 18, 2016 In Torres I get 3.65 ft3 at 35hz with 62 in2 port area. Not bad but not ideal either. No matter how you look at it, going off the information given, It's not a 32hz tune. Link to comment Share on other sites More sharing options...
Ken Gonzales Posted April 18, 2016 Author Report Share Posted April 18, 2016 So if the box was lengthened another 3 to 4 inches meaning the length on the port could be extended would I be able to get closer to the 32 Hz? Link to comment Share on other sites More sharing options...
Joe X Posted April 18, 2016 Report Share Posted April 18, 2016 But that would lower your internal airspace which increases tuning, anyways with 1" wood you should have a port height of 14.5" not 15.5" and the 23" port length was measured along the center line? Link to comment Share on other sites More sharing options...
Ken Gonzales Posted April 18, 2016 Author Report Share Posted April 18, 2016 I just remeasured and it is 14.5 and along the center line is 25 inches.content://media/external/file/138451 Link to comment Share on other sites More sharing options...
Ken Gonzales Posted April 18, 2016 Author Report Share Posted April 18, 2016 I don't know how to ad a picture but with those calculations I came up with a port area of 58 inches^2 with a tuning frequency of 38.55 Hz Link to comment Share on other sites More sharing options...
Joe X Posted April 18, 2016 Report Share Posted April 18, 2016 It should be 3.8 net @ 35Hz net then. Port area is 58 square inches, everything is somewhat smaller than what sundown would recommend. Link to comment Share on other sites More sharing options...
Ken Gonzales Posted April 18, 2016 Author Report Share Posted April 18, 2016 Ok, so is there any solution to get it closer to what SA recommends? Would extending the length of the box to allow the length of the port to be extended work? Link to comment Share on other sites More sharing options...
SubbinNCali Posted April 18, 2016 Report Share Posted April 18, 2016 I have two X-15 D4's in 3.5 net each @ 35 in my Bug and love it! I did have one in 4.25 net @ 32 and it sounded wonderful too! IDK if the juice would be worth the squeeze making marginal changes. Remember, they naturally play low. Link to comment Share on other sites More sharing options...
Ken Gonzales Posted April 18, 2016 Author Report Share Posted April 18, 2016 I have two X-15 D4's in 3.5 net each @ 35 in my Bug and love it! I did have one in 4.25 net @ 32 and it sounded wonderful too! IDK if the juice would be worth the squeeze making marginal changes. Remember, they naturally play low. I'm going from 3 12's to this so it might just take some getting used to and once the sub is broken in so I can hear it better, it just seems like its hitting high to me Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.