xpoppadaddyx Posted June 10, 2016 Report Posted June 10, 2016 I haven't done one of these so bare with a bruh. This is a slow build as stated in the title because I get only so much time to do anything. I brought this vehicle to drive to work and relieve miles on my Altima plus do a lil car audio on a budget . So here is the truck. 2002 Chevy Trailblazer (Build) 2013 Nissan Altima (Build) Poppa's YouTube Channel Poppa's FB Page Poppa's Instagram
frogcase2002 Posted June 10, 2016 Report Posted June 10, 2016 What are your plans Clarion cz702 Ssa evil mids and tweeters ppi 900.4 2 zcon 18s Taramps 10k 3 big dekas 1 xs 3 runs of 4/0 and big 3 300+ amp ohio generator 155.7 on dash at 36 (peak) 152 at 25
xpoppadaddyx Posted June 10, 2016 Author Report Posted June 10, 2016 I"ll be doing 3-10" RF-T1D410 on a RF-2500bdcp. I'm thinking an enclosure at 7cuft. @32hz should get me where I wanna be. The goal is to possibly move some air around and make my wife's hair move. lol 2002 Chevy Trailblazer (Build) 2013 Nissan Altima (Build) Poppa's YouTube Channel Poppa's FB Page Poppa's Instagram
xpoppadaddyx Posted June 10, 2016 Author Report Posted June 10, 2016 Here is what I have so far in the vehicle. It's an Alpine CDE-HD149BT. I really hated installing this thing. Taking the dash off was painful!!! 2002 Chevy Trailblazer (Build) 2013 Nissan Altima (Build) Poppa's YouTube Channel Poppa's FB Page Poppa's Instagram
frogcase2002 Posted June 10, 2016 Report Posted June 10, 2016 7 cubes seems pretty big for 3 10s Clarion cz702 Ssa evil mids and tweeters ppi 900.4 2 zcon 18s Taramps 10k 3 big dekas 1 xs 3 runs of 4/0 and big 3 300+ amp ohio generator 155.7 on dash at 36 (peak) 152 at 25
ckeeler11 Posted June 10, 2016 Report Posted June 10, 2016 7 cubes seems pretty big for 3 10s +1 on that. Rockford shows 1-1.5 per sub.
xpoppadaddyx Posted June 11, 2016 Author Report Posted June 11, 2016 That's just the minimum requirement the manf. recommends. 2002 Chevy Trailblazer (Build) 2013 Nissan Altima (Build) Poppa's YouTube Channel Poppa's FB Page Poppa's Instagram
frogcase2002 Posted June 11, 2016 Report Posted June 11, 2016 That's just the minimum requirement the manf. recommends. What is making you want to go with 7 cubes? Clarion cz702 Ssa evil mids and tweeters ppi 900.4 2 zcon 18s Taramps 10k 3 big dekas 1 xs 3 runs of 4/0 and big 3 300+ amp ohio generator 155.7 on dash at 36 (peak) 152 at 25
jcarter1885 Posted June 11, 2016 Report Posted June 11, 2016 Yeah I agree, maybe do three 12"s instead. Nav-TV Zen V Audio Interface AudioControl DM-608 (2) Stevens Audio Neo-Comp Full-Size Horns (4) Faital Pro 6PR160 6.5" AudioControl LC-6.1200 (1) Fi Neo 4.7 15" D2 in 3.74 Cubic Feet @ 27.70 Hz Ampere Audio AA3800.1 Odyssey ODP-AGM48 Battery (Starting) Odyssey ODX-AGM31 Battery (Trunk) Big 3 - 2\0 Welding Cable, KnuKonceptz Speaker Wire & 1/0 Power Cable, NVX RCAs, Second Skin (Speaker Tweaker Pads, Damplifier Pro Mat), Diode Dynamics LEDs
xpoppadaddyx Posted June 11, 2016 Author Report Posted June 11, 2016 The equipment is already bought so no change on that. If I intend on using up most of my space in the rear, 7 cubes would do it. Now I suspect after the port. bracing, and displacement I'll end up around 6. I'm no pro box builder but suggestions are more than welcome. 2002 Chevy Trailblazer (Build) 2013 Nissan Altima (Build) Poppa's YouTube Channel Poppa's FB Page Poppa's Instagram
Recommended Posts
Archived
This topic is now archived and is closed to further replies.