Aero-port enclosure for rockford 12 inch p3's help

[Dill]

Just wondering if I could get some help with an enclosure that I would like to build.

Starting off, will admit that I am fairly new to building boxes and need lots of help.

Currently I have two Rockford Fosgate P3's powered by a fosgate prime 1200 watt in a prefab box

Listen to mostly rap, g-eazy, rae sremmurd, 21 savage, that kinda of stuff.

Max dimensions that I could build is H- 17in W- 37 in D- 20 in

Wondering what would be the best tuning for the subs and how I would achieve this with an aero port?

And what dimension would work best for building this box?

[Joe X]

The following is a sample box for your reference, it's for a trunk car and uses a very easily implemented slot port (likely easier than with going with a round port), it's tuned lower for rap, power: to sub rated, amp subsonic filter to 28Hz, minimum port clearance 3 1/2", figure is just an assembly guide:

[bcbrassard]

OP, Joe X always has good designs. Build it and you will be happy.