1mounty Posted January 30, 2017 Report Posted January 30, 2017 hello i need help building a box for my dual soundqubed hdc3.1 18s. i would like it to be tuned to 35hz it will be a daily in the back of an explorer. they will be ran on 2 cab 1600.1 strapped. the dimensions to play with are 34l x 41w x 22h my length and width are pretty much maxed and i can go up on the height it need. any comments and suggestions will be greatly appreciated! thanka
Joe X Posted January 30, 2017 Report Posted January 30, 2017 Here is a suggestion, power: to subs rated, amp subsonic filter to 28Hz, minimum port clearance 4 7/8", figure is just an assembly guide:
Daniels817 Posted January 31, 2017 Report Posted January 31, 2017 Would that work in a tahoe 96 two door I have two sp4 v2 18s going to run them on Skv2 3500.1December strap.
Joe X Posted January 31, 2017 Report Posted January 31, 2017 3 hours ago, Daniels817 said: Would that work in a tahoe 96 two door I have two sp4 v2 18s going to run them on Skv2 3500.1December strap. Those will want some 8K power and a little different box, would need to be stiffer and have greater port area at the very least.
Wasteland_Audio Posted January 31, 2017 Report Posted January 31, 2017 I already gave him a design in his thread lol
Recommended Posts
Archived
This topic is now archived and is closed to further replies.