box for 2 skar ivx 10's

[d-nice88]

Can anyone tell me how much port ill need for these subs? they require 1.3 cubes a piece and im making a box for a honda civic being powered by a skar audio rp 800.1 Nothing fancy just want a box

that i can get the best sound and most output from 800 wats rms as much as i can.

[d-nice88]

https://www.skaraudio.com/products/ivx-10v2?variant=17690820993

 

This is the link to the specs of the woofer i got. When building in torres should i double port area and length to account for 2 woofers since im using 2 subs?

[d-nice88]

my max dims are 15 h x 33 w x 12 depth 

 

 

[kam311]

23 hours ago, d-nice88 said:

https://www.skaraudio.com/products/ivx-10v2?variant=17690820993

 

This is the link to the specs of the woofer i got. When building in torres should i double port area and length to account for 2 woofers since im using 2 subs?

No, the only thing the extra woofer changes is the displacement value. The tuning is relevant to the airspace and not the number of subwoofers.

[d-nice88]

 

Here is what i got so far. How does it look? any suggestions to make the box better?

Here is a link to the specs of the woofer and i will be powering 2 of them with the skar 800.1 rp amp. nothing major somethings decent for a 97 honda civic.

https://www.skaraudio.com/products/ivx-10v2?variant=17690820993

[kam311]

Is it going to be an L port, or a straight port? Port area per foot  is a tad low, but might not cause you any problems 

[Joe X]

Website says:

Ported Volume : 1.50 ft^3
Port Area : 23.5 sq.in.

That is per driver.

[d-nice88]

Ok i will change it up and repost thanks guys

[d-nice88]

 

Here is the new sketch up. Does it look better ? Also if i didnt want to tune to the recomended 41 hz could i tune low? like 32 hz? I like the lows and i never had 10's before. Only 12's and 15's.

[ckeeler11]

Well knowing Skar they put 41 for box tuning because that is the Fs of the sub. I have not used the IVX but would suspect you would be okay tuning into the 30's.