luckyishere Posted April 13, 2017 Report Share Posted April 13, 2017 Hello Guys, I am looking to get some help in designing an Enclosure for Dual sundown audio X 12s v.2 for a hatchback. I don't have too much of space to work with but i am looking for an efficient Box Design. I have been designing Enclosures for years but have always worked with slot Ports and i have a 0% experience with the Aero Ports. This time i want to try Aero Ports and when i searched online i was getting confusing information regarding the Port area and Air Velocity. Can someone please help me with this enclosure? The Max outer dimensions that i can squeeze from the boot are H - 21.5 , W - 39 , D- 15.5 (All in inches) Config wud be Sub up , Port up . I want to go the Aero Port route this time Pioneer 80PRS Alpine PXA H701 w/ RUX-C701 Sundown Audio ZV3 12's Hertz MP15K Unlimited Hertz SPL Show SV165 x 8 pcs Hertz SPL Show ST44 x 4 pcs Hertz HDP4 x 2 Pcs Mechman 300A Alternator Shok Industries Ref Pro Cables Audio Art 260.6XE Custom Bus Bars My youtube channel - https://www.youtube.com/luckyishere12345 My Current Build Log - http://www.stevemeadedesigns.com/board/topic/163038-4th-order-bandpass-wall-4-zv3-12sfrom-india/ My Earlier Build Log - http://www.stevemeadedesigns.com/board/topic/151241-2-fi-sp4s-in-a-ford-in-india/ Link to comment Share on other sites More sharing options...
Joe X Posted April 13, 2017 Report Share Posted April 13, 2017 Unless you can find 7" pipe to do a couple of round ports with it I would easily go with the slot port. You could do 3 long 6" ports but that would be a little more impractical to build. Link to comment Share on other sites More sharing options...
Junior81 Posted April 15, 2017 Report Share Posted April 15, 2017 Hey Joe I have been reading the forums a bit and it seems like your the man when it comes to enclosures. I am looking for a design that would work under my bed in the sleeper of my semi truck. I have the following are to work with. 19 tall, 39 wide, 24 deep. I listen to mainly rap and decaf but I would still like it loud. I just wasn't sure what type of design being that it is going in the sleeper of a truck I couldn't find much in the search on the forums. Anyhow if you have any ideas any help you can give me would be appreciated thanks. Sorry didn't mean to high jack your post Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.