Jump to content
Second Skin Audio

Box design help for 1 12.2 HCCA


Recommended Posts

Hey guys, looking for some help on designing a box for an HCCA 12.2. It will be running off of a SAZ-3500 in a 2012 Malibu. Want to do rear facing sub and port. This is a daily setup and I'm fine with anywhere in the 32-38 HZ range.

Max dimensions:

20" Deep
32" Wide
13.5" Tall
 

Link to comment
Share on other sites

Your going to have to bring airspace down, and bring port area and length up. Not sure of that exact sub. But 2.71 for a 12 seems like alot

18 Sierra 6.2 Z71 : 3 F8L's, DD M2a @.67, 1.95@33

05 TL build log SOLD

04 YukonXL : jvc kw-v51bt , RE 6.5c, 4 jbl gt5 12s, Memphis pr1000.1 5.5 cu.ft. sealed

Link to comment
Share on other sites

Due to your space limitation and the large amount of power you are running, you probably aren't going to be able to fit enough port area to make everything perfect.  You just have to do the best you can and accept that you are going to get some port compression and noise.  It is what it is.  I agree with YukonXLs suggestion of shrinking down the net volume a bit to make room for more port.

"Nothing prevents people from knowing the truth more than the belief they already know it."
"Making bass is easy, making music is the hard part."

Builds:

U7qkMTL.jpg  LgPgE9w.jpg  Od2G3u1.jpg  xMyLoO1.jpg  9pAlXUK.jpg

Link to comment
Share on other sites

If flared on both ends, you might be alright with that. I have 2 flared 6" aero's on my 7cube box with 2k going to it. DD 9518 

18 Sierra 6.2 Z71 : 3 F8L's, DD M2a @.67, 1.95@33

05 TL build log SOLD

04 YukonXL : jvc kw-v51bt , RE 6.5c, 4 jbl gt5 12s, Memphis pr1000.1 5.5 cu.ft. sealed

Link to comment
Share on other sites

You will need about twice as much port. a lot of it depends on the power.

91 C350 Centurion conversion ( Four Door One Ton Bronco)

250A Alternator (Second Alternator Coming Soon)

G65 AGM Up Front  / Two G31 AGM in Back

Pioneer 80PRS

CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage

CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill

FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon)

Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon)

Link to comment
Share on other sites

On 18/07/2017 at 2:01 PM, YukonXL04 said:

Your going to have to bring airspace down, and bring port area and length up. Not sure of that exact sub. But 2.71 for a 12 seems like alot

That's what I would do.

I'd try 2 (max 2.5) cu Feet : that should be enough.

black BMW X1 2.0 l 192 hp

OEM head unit, Amplifiers Audison AP 8.9 amp with integrated DSP and Ampere Audio 1200.

Focal ES 100 K in front doors, and Dayton RS 180 for midbass under the front seats.

2 SSA DEMONS 10" subs, in a 2.6 ft3  ported box. SecondSkin Damplifier on front doors, and Luxury Liner Pro for the cargo area.

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 458 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...