DiBo Posted September 18, 2018 Author Report Share Posted September 18, 2018 Gonna try a Zv5 @.5 on the Wolfram 4500.1 I was rising to a little over 4 ohms with the team woofer only giving it 1600 watts... Maybe I'll peak @2-2.5 with this dual 1. If so I should be able to give her around 2.7-3k?? First time wiring down. Link to comment Share on other sites More sharing options...
CleanSierra Posted September 18, 2018 Report Share Posted September 18, 2018 Just confirmed, if you attend the Bullhead show, there will be a meter to clamp you and check rise and wattage. Guy's name is Mario that will have the meter and will be with the DC crew. Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
Kyblack76 Posted September 19, 2018 Report Share Posted September 19, 2018 21 hours ago, DiBo said: Gonna try a Zv5 @.5 on the Wolfram 4500.1 I was rising to a little over 4 ohms with the team woofer only giving it 1600 watts... Maybe I'll peak @2-2.5 with this dual 1. If so I should be able to give her around 2.7-3k?? First time wiring down. Havent run 1ohm or higher in years. Not even on my doors... SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
DiBo Posted September 19, 2018 Author Report Share Posted September 19, 2018 20 minutes ago, Kyblack76 said: Havent run 1ohm or higher in years. Not even on my doors... I'm starting to learn bro.. Link to comment Share on other sites More sharing options...
Kyblack76 Posted September 19, 2018 Report Share Posted September 19, 2018 1 hour ago, DiBo said: I'm starting to learn bro.. That said. Be prepared for some losses. Gear loss I mean mate. Just be prepared, if and when. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
DiBo Posted September 19, 2018 Author Report Share Posted September 19, 2018 31 minutes ago, Kyblack76 said: That said. Be prepared for some losses. Gear loss I mean mate. Just be prepared, if and when. Gotta pay to play... Have backups ready for certain. Link to comment Share on other sites More sharing options...
Ninja_v1.0 Posted September 25, 2018 Report Share Posted September 25, 2018 On 9/18/2018 at 11:41 PM, Kyblack76 said: That said. Be prepared for some losses. Gear loss I mean mate. Just be prepared, if and when. cost so much when pushing limits When your at the top everyone is coming for you, friends, family, haters and even those who don't know you.. my advice.. KILL EM ALL Link to comment Share on other sites More sharing options...
DiBo Posted September 25, 2018 Author Report Share Posted September 25, 2018 Basshead problems. System is whoopin my ass rt now. Lol. Gotta lotta testing to do. Need a PROVEN BIG BOARD THAT CAN WIRE DOWN ALSO. Frustrated to say the least. Link to comment Share on other sites More sharing options...
DiBo Posted September 26, 2018 Author Report Share Posted September 26, 2018 Wow... I'm an idiot!! Shooting myself in the foot since upgrading. You guys won't believe how stupid I am. Details soon. Link to comment Share on other sites More sharing options...
DiBo Posted September 26, 2018 Author Report Share Posted September 26, 2018 Ok so I got an apocalypse AAK 4000.1d because the Wolfram sound was horrible ( user error) and I couldn't get it to hit really or sound good and it was cutting out on certain songs with certain bass frequencies wired to a [email protected]. Well, seems like my deck has been the problem the whole time. My dumbass split the front signal because I burnt up an RCA jack or one of the outputs on the deck and I didn't notice that the crossover, that went down to 50 hertz with a -6 to -18 decibel slope... Is a fookin hpf!! High pass filter. So basically the rear channel has been powering my subwoofer with the crossover set to 50hz -12db but instead of it crossing over from 50 and down it's been crossing over 50 and up so my subsonic on my amp has been set at around 28 maybe 25 Hertz and the filter has been set to only let in 50 and above they've been fighting each other causing a bad signal I believe. Tones sound okay but when I play music it sounds like s***. I hooked up the AAK 4000.1d last night and I had the crossover on the deck turned off, man that shit was pounding!! this also explains why I peaked at 46 instead of the 31 that I peaked at before. I just spent $1600 on equipment cause I'm fookin stupid. Too much ? I guess. Lol Damn legal weed in Vegas!! I'm too lit!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.