violntshags Posted August 28, 2018 Author Report Share Posted August 28, 2018 @SnowDrifter that’s why I was asking about fuses and any “suggestions” I’m very new to this. I have a fire extinguisher already thanks though Link to comment Share on other sites More sharing options...
SkarredSierra Posted August 28, 2018 Report Share Posted August 28, 2018 Bro for 12 k youll need alot more than 2 batts and 1 alt. Your talking at least 4 batts and two high output alts with multiple 0 gauge ofc runs of neg and pos front to back and even then your gonna get low voltage with a few mins of full tilt. Not to mention mids highs amps and sound deading. Whats all this going in? Wat u using it for? Burps? Demo? Competing? Wat woofers you running? Link to comment Share on other sites More sharing options...
violntshags Posted August 28, 2018 Author Report Share Posted August 28, 2018 @mathewyocham just for shits and giggles. A Silverado, 2 DC 18” level 6’s. This is by no mean anything for competitions. Just me doing something fun. Also this is just the start, I’m buying everything over the next couple years. I’m just trying to get my shit in order first Link to comment Share on other sites More sharing options...
AlpineNut Posted August 28, 2018 Report Share Posted August 28, 2018 7 hours ago, violntshags said: sorry I asked for help. Fuck you assholes People try and help you and you go off like this wow. all you had to do was type in the amp in a search engine like I just did and got all this nifty info! TECHNICAL SPECIFICATIONS 12000.1D 1Ω Power @ 12.6V @ 1Ω: 1 x 12000 W RMS Power @ 12.6V @ 2Ω: 1 x 6600 W RMS Power @ 12.6V @ 4Ω: 1 x 3630 W RMS Power @ 14.4V @ 1Ω: 1 x 15672 W RMS Power @ 14.4V @ 2Ω: 1 x 8620 W RMS Power @ 14.4V @ 4Ω: 1 x 4741 W RMS Operating Voltage: 9V - 16V Current Draw (Music): 627A Current Draw (Max): 1253A THD + N - (10% Rated Power): 0.09% Damping Factor: >1000 SNR: 74dB Frequency Response: 5 Hz – 20 kHz Crossover HPF: 5 Hz – 80 Hz Crossover LPF: 80 Hz – 20 kHz Bass Boost: 0 – 12dB Bass Boost Range 35Hz – 55Hz Recommend Fuse: 3 x 225A (Music) / 3 x 500A (SPL) 73456w9vbwevsdb sodtbsorutnvsd sdtuspdun sd d f gsdfiusd gdf n Link to comment Share on other sites More sharing options...
Joshdashef Posted August 28, 2018 Report Share Posted August 28, 2018 1 hour ago, violntshags said: SounDigital SD12000.1D EVO II 2018 1 ohms Google search had this to say on an eBay listing info section: http://vi.raptor.ebaydesc.com/ws/eBayISAPI.dll?ViewItemDescV4&item=253117356769&category=18795&pm=1&ds=0&t=1527173182000&ver=0&cspheader=1 12000.1D 1Ω Power @ 12.6V @ 1Ω: 1 x 12000 W RMS Power @ 12.6V @ 2Ω: 1 x 6600 W RMS Power @ 12.6V @ 4Ω: 1 x 3633 W RMS Power @ 14.4V @ 1Ω: 1x 15672 W RMS Power @ 14.4V @ 2Ω: 1 x 8620 W RMS Power @ 14.4V @ 4Ω: 1 x 4741 W RMS Working Voltage: 9V - 16V Consumption in Musical Program: 627A Maximum Power Consumption: 1253A Recommended fuse: 3 x 225A According to this you should be using three inputs, each fused 225 A. Now 0 gauge ofc is good for 300 A but in this instance if you were to run three runs into the amp you could use CCA if you wanted to but I find that limits your ability to upgrade in the future. My suggestion is to put at least two runs of 0 gauge ofc, each fused 300 A, preferrably three runs for any spikes in draw. I'm not sure if the maximum power consumption is a highly biased number or if that's really likely to draw that much. Regardless, make sure you put this amp somewhere you can cool it cause it's gonna be toasty. Good luck man SMD Tool Map (2022): https://www.stevemeadedesigns.com/board/topic/220267-smd-tool-map-2022/ My Port Size Calculator (in progress): https://www.stevemeadedesigns.com/board/topic/217087-port-size-calculator-in-progress/ Common Port Walls for a Slot Port: https://www.stevemeadedesigns.com/board/topic/217076-common-port-walls-why-it-matters-to-your-box/?tab=comments#comment-3240313 Link to comment Share on other sites More sharing options...
Joshdashef Posted August 28, 2018 Report Share Posted August 28, 2018 8 minutes ago, AlpineNut said: People try and help you and you go off like this wow. all you had to do was type in the amp in a search engine like I just did and got all this nifty info! TECHNICAL SPECIFICATIONS 12000.1D 1Ω Power @ 12.6V @ 1Ω: 1 x 12000 W RMS Power @ 12.6V @ 2Ω: 1 x 6600 W RMS Power @ 12.6V @ 4Ω: 1 x 3630 W RMS Power @ 14.4V @ 1Ω: 1 x 15672 W RMS Power @ 14.4V @ 2Ω: 1 x 8620 W RMS Power @ 14.4V @ 4Ω: 1 x 4741 W RMS Operating Voltage: 9V - 16V Current Draw (Music): 627A Current Draw (Max): 1253A THD + N - (10% Rated Power): 0.09% Damping Factor: >1000 SNR: 74dB Frequency Response: 5 Hz – 20 kHz Crossover HPF: 5 Hz – 80 Hz Crossover LPF: 80 Hz – 20 kHz Bass Boost: 0 – 12dB Bass Boost Range 35Hz – 55Hz Recommend Fuse: 3 x 225A (Music) / 3 x 500A (SPL) You beat me to it dang nabbit ? SMD Tool Map (2022): https://www.stevemeadedesigns.com/board/topic/220267-smd-tool-map-2022/ My Port Size Calculator (in progress): https://www.stevemeadedesigns.com/board/topic/217087-port-size-calculator-in-progress/ Common Port Walls for a Slot Port: https://www.stevemeadedesigns.com/board/topic/217076-common-port-walls-why-it-matters-to-your-box/?tab=comments#comment-3240313 Link to comment Share on other sites More sharing options...
Jessica Posted August 28, 2018 Report Share Posted August 28, 2018 627 amps to make 12k of power? wow, that is an efferent amp. Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.