SnowDrifter Posted April 21, 2019 Report Posted April 21, 2019 Cool. Another water leak thread! Factory gap sealant failed at the top of the A pillar. Have some silicone on there for the short term but I need to scrape the old stuff out and fix it properly. What's the preferred sealant to use for this stuff? Curing? Non curing? Butyl/silicone/urethane/etc? ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
will77530 Posted April 21, 2019 Report Posted April 21, 2019 Get ya some high quality 3m panel bond big fella
Skullz Posted April 21, 2019 Report Posted April 21, 2019 http://www.loctiteproducts.com/p/pl_ca_prem_adv/features/Loctite-PL-Premium-FAST-GRAB-Polyurethane-Construction-Adhesive.htm 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2
Recommended Posts
Archived
This topic is now archived and is closed to further replies.