jessdabest77 Posted November 22, 2023 Report Posted November 22, 2023 Hey guys I am to the point before I begin my build to get the best performance but undecided on what route to go. I have a 2003 Chevy S10 extended cab truck and am going to run two SQ3500’s amps strapped. Behind my seats, I have measurements of 45 1/2” wide x 17 1/2” depth x 26 up to 28” height. The issue I have is the size of box. I currently have two older FI SP4 15’s dual 2 ohm and wondering if I should use them or get two maybe even three 12’s instead? I think if I ran the 15’s they would be subs and port up because of the seats but if I do the 12’s I can face them forward. Honestly I want to play really low and loud, rap, hip hop, bass head here is my goal but don’t know what route to go? I would do a blow through but the truck has air bags. Any ideas,suggestions or examples would be greatly appreciated thanks
Joe X Posted November 22, 2023 Report Posted November 22, 2023 Sounds like an old problem..LOL BUT yes, you could probably have 3 DC audio level 5e 12s on 15 K in that space and have an edge over what you have right now. Actually you could maybe have 4 DCL5e 12s on 20K, they only use 1.5 cubic feet net each. In any case I don't know how healthy is for your 15s is staying boxed for years and years, might want to ask Fi about that.
jessdabest77 Posted November 24, 2023 Author Report Posted November 24, 2023 Ouch. Sometimes life happens but can’t give up and hopefully I’ll get this build finally done once an for all
BassMunky Posted November 25, 2023 Report Posted November 25, 2023 Blowvthru Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
jessdabest77 Posted December 2, 2023 Author Report Posted December 2, 2023 I was also thinking that a blow through but the truck has air bags
Recommended Posts
Archived
This topic is now archived and is closed to further replies.