ISO Posted June 28, 2008 Author Report Posted June 28, 2008 hey if u ever blow it i would be more then happy to buy it from u... doubt its gonna happen thouI'll keep it in mind but I'm alittle over obsessed with my 1501BDs. Isobaric - Refers to the practice of coupling two drivers together to make them act as one. "Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go." Insanity: doing the same thing over and over again and expecting different results. The Destruction of a person builds character.
Sick916 Posted December 2, 2008 Report Posted December 2, 2008 Hi, i know this is for a bd1500 but now my bd1000 is doing the same thing when im running it at 1 ohm it was fine but then i tuned my settings and it goes into protect on some songs only. Also my gain is really low at like 15%. Will removing the d106 on a 2002 bd1000 help me the same way. 1996 Camaro RS Rockford Fosgate BD1000.1 Rockford Fosgate 400a4 Old Skool 2x 12" TSW3001-D4 Pioneer Subs Pioneer deh-p980bt Yellow Top Primary Battery 1.5 Diesel Audio Cap<Its just there to impress the females with shiny things Kinetik HC800
emperorjj1 Posted December 3, 2008 Report Posted December 3, 2008 From what he explained he replaces everything. He doesn't leave any parts from the original amp in there. To me fixing an amp means you find the probblem and fix it and don't touch anything else. So he fully rebuilds the amp with all new parts and doesn't reuse any of the original parts.(even the good ones) So I see a big difference between fixing an amp and fully rebuilding the amp. Maybe I don't get it. LOL he would never do so without completely replacing the board. He probably does do just that but i can guarantee he doesn't physically pull off everything from the board and replace with new parts. That would take forever J. JMy CardomainFINISHED COBALT SS/SC DUAL ALTERNATOR PICS theres no such thing as too expensive when it comes to upgrades like that, because imo if you are gonna spend to upgrade then do it correctly rather then be a cheap ass ricer
Boon Posted December 3, 2008 Report Posted December 3, 2008 he would never do so without completely replacing the board. He probably does do just that but i can guarantee he doesn't physically pull off everything from the board and replace with new parts. That would take forever That's what I thought. Especially considering half the class d amps out there have the tops ground off most of the driver ICs in them to protect the design. All those little SMCs etc, it would be far more time consuming than the amp is worth. 10.x volts fo' life!
ISO Posted February 25, 2009 Author Report Posted February 25, 2009 Does this mod work on tha 1001bd?WoW I thought this thing was long gone.I don't know if it will work on the 2003 1001BD? Hey mods may we make this thread disapear like a fart in the wind before someone gets the wrong idea or for people that might not understand how to use a modded amp. I guess I don't want it to be me that puts the thought of useing a modded amp in a daily driver with the potential of being dangerous to the operators vehicle or possible harm to the installer. Expescialy if the owner/installer is inexperienced. PLEASE DELETE THREAD Thank you, ISO Isobaric - Refers to the practice of coupling two drivers together to make them act as one. "Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go." Insanity: doing the same thing over and over again and expecting different results. The Destruction of a person builds character.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.