Jump to content
Sundown Audio

Recommended Posts

Brandon's Bronco simply doesn't meter high - but this sub on the 3000D metered almost exactly like the three Nightshade 15s -- 143.5 dB

Need to try in a different vehicle for some good numbers. Starting to think this Bronco simply won't meter above this level no matter what *laughs*

We played around with it for about an hour an it's doing fine so far.

I have a vehicle that'll do some good #s. http://www.stevemeadedesigns.com/board/public/style_emoticons/default/01nocomment8so.gif I wouldn't mind making a trip back up there & need to pick up another 1500d and some shirts anyway.

teamnemesissundown-1.jpg

Link to comment
Share on other sites

I have a vehicle that'll do some good #s. http://www.stevemeadedesigns.com/board/public/style_emoticons/default/01nocomment8so.gif I wouldn't mind making a trip back up there & need to pick up another 1500d and some shirts anyway.

The coil failed due to the "new" fiberglass former wrapping sliding off the coil. Triple joint still glued to the wrap... but the rest of the coil just fell down into the motor. Apparently the spun-lace nomex that we all know and love is in short supply so they are trying this fiberglass stuff... I told the coil manufacturer to make me some new ones with spun lace so I can get back to testing - you can swing by then :)

Edited by sundownz

- Jacob Fuller

- Owner, Sundown Audio

- Sundown Audio on FACEBOOK

- Please DO NOT PM ME -- use my email address -- [email protected]

Banner_468x60.jpg

Link to comment
Share on other sites

Jacob do know what kinda price these are gonna run? are you going to a pre-release price? If it was mentioned earlier in the thread sry I didn't catch it.

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

iirc he said its gonna be more than a nightshade and less than a DD Z

i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?

Link to comment
Share on other sites

iirc he said its gonna be more than a nightshade and less than a DD Z

thats a pretty large gap..... $2K+ and $550.....

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

thats a pretty large gap..... $2K+ and $550.....

Indeed - large gap on purpose, as I have no real idea what they would cost yet ;) Nor am I certain this design will be the final production design as it stands.

- Jacob Fuller

- Owner, Sundown Audio

- Sundown Audio on FACEBOOK

- Please DO NOT PM ME -- use my email address -- [email protected]

Banner_468x60.jpg

Link to comment
Share on other sites

Posted Image

What is the mounting depth right now? Looks insane :shok::huh::wacko::yahoo::friends:

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...