Solotriggerman Posted July 10, 2008 Report Share Posted July 10, 2008 Any ideas what it could be? it cut in the middle of a song it wasnt playing to loud when it cut maybe 3/5 of max volume at the deck no lights on the amp are on no fuses blown. and i even checked the remote wire its good. wtf?? Quote Link to comment Share on other sites More sharing options...
wL<3bass Posted July 10, 2008 Report Share Posted July 10, 2008 ground loose? power wire? Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
Bass4Lyfe Posted July 10, 2008 Report Share Posted July 10, 2008 yeah - check all the connections on the amp. if they're good and you're sure everything is done right, the amp could have blown something (fuse, etc?) Quote ~Matthew 1998 Toyota Camry XLE V6 3L (1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm with Shock and Proximity (1) 20% Tint All Around (Gately Audio) (1) 250 Amperage HO Alternator (1) Big 3 Done In 1/0 (2) Kinetik HC2400 Power Cell (1) Alpine IVA-D106 Receiver (1) Peripheral Video Bypass Device (4) Alpine SPS-17C2 Speakers (1) Alpine KCE-422i iPod Control Interface (4) Sheets Dynamat Extreme; for speakers (1) 10 Square Feet Hushmat (Trunk & Rear Deck) (4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils (1) Wall Built By David, Tuned to 32 Hz (1) Rockford Fosgate T40001bd Amplifier (1) Stinger 1/0 Wiring (2 runs of + 2 runs of -) (1) Stinger Volt Meter Link to comment Share on other sites More sharing options...
Shinju Posted July 10, 2008 Report Share Posted July 10, 2008 Puff the Magic Smoke Dragon didn't pay your amp a visit did he? Quote Link to comment Share on other sites More sharing options...
Solotriggerman Posted July 10, 2008 Author Report Share Posted July 10, 2008 Puff the Magic Smoke Dragon didn't pay your amp a visit did he? I hope not the amp isnt even a year old and i have even been nice to it lol. But i will go out and check the ground and power i shall return shortly. Quote Link to comment Share on other sites More sharing options...
ALPINE408 Posted July 10, 2008 Report Share Posted July 10, 2008 (edited) Muti meter/DMM ftw Edited July 10, 2008 by Team Bassick (ALPINE) Quote Have you ever had your woofers blown? Link to comment Share on other sites More sharing options...
hotshot27 Posted July 10, 2008 Report Share Posted July 10, 2008 check the fuse on the power wire . [from experience I check it first] Quote Current Setup: Factory HU with LOC mids/highs-Insignia components Sub- E8 in bass tube Amp- sae-1200d Show Setup: HU-Sony MEX-1HD (brings massive respect for sony) fronts - Infinity Kappa perfect comps rears- Infinity Kappa coax mid/high amp - Autotek 5600 Subs - 2 RE SE 15's Sub Amps - 2xSAE-1200D Box - 5cubes sealed Wire- Lots of Knu 1/0 SECOND SKIN Link to comment Share on other sites More sharing options...
savageracer Posted July 10, 2008 Report Share Posted July 10, 2008 double check your fuses i had a fuse blow before but it still looked good.I checked it with a dmm and found it was bad. Quote Link to comment Share on other sites More sharing options...
Solotriggerman Posted July 10, 2008 Author Report Share Posted July 10, 2008 I think its the ground it doesnt like the ground it had anymore. its weird because nothing with the wire has changed it was still secure and still firm. but when moved decided to come on briefly. Quote Link to comment Share on other sites More sharing options...
newls1 Posted July 10, 2008 Report Share Posted July 10, 2008 I think its the ground it doesnt like the ground it had anymore. its weird because nothing with the wire has changed it was still secure and still firm. but when moved decided to come on briefly. Well thats damn good news then, your AMP is still well! Quote I love my staffie So anti FACEBOOK it isn't even funny Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.