Kicker Guy Posted July 10, 2008 Report Share Posted July 10, 2008 Is it all the spokes or just those 3? Head Unit: Pioneer DEH-P6000UB Sub Amp:American Bass VFL 500.1 Subs: 4 Fi BL 18's Enclosure:21.5 Cubic foot flat wall tuned to 40 hz Batteries: 3 Kinetik 2400's in the back, Kinetik 1200 under hood. Mids & Highs: 4 Kicker DS 6.5 coax in doors, 2 Kicker DS coax in pillars Highs Amp: Kicker kx250.2, kx100.2 Wire: 4 Runs 1/0 gauge Knukonceptz Link to comment Share on other sites More sharing options...
AI James Posted July 10, 2008 Author Report Share Posted July 10, 2008 all Link to comment Share on other sites More sharing options...
ISO Posted July 10, 2008 Report Share Posted July 10, 2008 Its all of them. I have been thinking about this. Maybe try the liquid version and leave a small gap equally around the sub so it doesn't squeeze out and don't touch it for atleast 48 hours. Thats the best I can do for ya. Good luck again man. Isobaric - Refers to the practice of coupling two drivers together to make them act as one. "Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go." Insanity: doing the same thing over and over again and expecting different results. The Destruction of a person builds character. Link to comment Share on other sites More sharing options...
AI James Posted July 10, 2008 Author Report Share Posted July 10, 2008 thanks again Link to comment Share on other sites More sharing options...
Kicker Guy Posted July 10, 2008 Report Share Posted July 10, 2008 I would probably try the putty stick myself... I think that might hold it better. Head Unit: Pioneer DEH-P6000UB Sub Amp:American Bass VFL 500.1 Subs: 4 Fi BL 18's Enclosure:21.5 Cubic foot flat wall tuned to 40 hz Batteries: 3 Kinetik 2400's in the back, Kinetik 1200 under hood. Mids & Highs: 4 Kicker DS 6.5 coax in doors, 2 Kicker DS coax in pillars Highs Amp: Kicker kx250.2, kx100.2 Wire: 4 Runs 1/0 gauge Knukonceptz Link to comment Share on other sites More sharing options...
qu1cks1lver56 Posted July 10, 2008 Report Share Posted July 10, 2008 i'd try some good ol' 2 part epoxy. it seems to better than jb weld for me. First Gen Xterra: Always changing DNX 690HD RF 360.3RF T3002RF T4004RF T10001bdSilver Flute 6.5"s Tang Band 1" TweetersSundown X18 in 7cubes net tuned to 32hz Trust me .25 Blows your Load. Link to comment Share on other sites More sharing options...
AI James Posted July 10, 2008 Author Report Share Posted July 10, 2008 bought some jb weld, will be working on it later on Link to comment Share on other sites More sharing options...
AI James Posted July 11, 2008 Author Report Share Posted July 11, 2008 well heres the beginning stages Link to comment Share on other sites More sharing options...
Boon Posted July 11, 2008 Report Share Posted July 11, 2008 I don't know how those motors look inside but I suspect you're going to have some pretty epic coil alignment issues... suppose it all depends on how close the coil is to the pole piece. And I would definitely mount it inverted... all that weight + vibration on those joints can't be good for it. Good luck though, keen to see how you get on... mind if I ask how it happened in the first place? 10.x volts fo' life! Link to comment Share on other sites More sharing options...
AI James Posted July 11, 2008 Author Report Share Posted July 11, 2008 honestly no idea how it happened igot it from a friend like this for nothing . Ive played it while holding it down no problems already so i am confident coil problems wont be an issue Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.