Mosin Posted July 30, 2008 Author Report Posted July 30, 2008 No just dont clip it....dmm and gain chart = your friend mmmm, I like friends! Okay, cool thanks for your advice guys! Once again, you guys here at SMD show me the way. Quote Derp.
loganberry Posted July 30, 2008 Report Posted July 30, 2008 nah 1300 should be ok, but 2800+ is...i had a friend come to me with his old l7 12" and wanted to see if we could blow it without using a wall socket...wired it to 1 ohm on my 2kd...did white girl...under 30 seconds both coils were smokin like a chimney... they are strong and should take the 1300 if its clean Quote My F-150 Build GET ON THE BANDWAGON what if they tried messing with the amps when the subs werent louder hahah jk
Aaron813 Posted July 30, 2008 Report Posted July 30, 2008 The zx1000s wont do 1300 the highest that I have ever seen a birth sheet for one was less than 1100 and I personally looked thru about 20 of them trying to find the highest at a local store Quote
wL<3bass Posted July 30, 2008 Report Posted July 30, 2008 (edited) The zx1000s wont do 1300 the highest that I have ever seen a birth sheet for one was less than 1100 and I personally looked thru about 20 of them trying to find the highest at a local store Do I have to go down to my brother store and get both of them out of the box and show you the birthsheets? edit: they were '08 models too btw....I have no reason to lie... Edited July 30, 2008 by wL<3bass Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
Aaron813 Posted July 30, 2008 Report Posted July 30, 2008 Do I have to go down to my brother store and get both of them out of the box and show you the birthsheets?edit: they were '08 models too btw....I have no reason to lie... These were 08 models also so unless his distributor hand selected them then I dont know why they where so low Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.