ronrico418 Posted September 12, 2008 Report Posted September 12, 2008 If anyone needs help in the Tampa Bay area with custom installs, door panels, one-off dashboards audio , video or just system applications call 813-418-9989 AUTOMATIC 20% off custom work for SMD forum members. We are the home to the current Iasca iSQc champion and have been involved with SPL for over 20 years. Joe Below is a small sample of some of our work. Some pics are over 16 years old but all wrk is done by us in house. Quote
Torres Posted September 13, 2008 Report Posted September 13, 2008 that mustang install is slick! Quote
Guest Caps Posted September 13, 2008 Report Posted September 13, 2008 do you drive an older red blazer? Quote
ronrico418 Posted September 13, 2008 Author Report Posted September 13, 2008 do you drive an older red blazer? YES and everything is for sale except the Havocs. Seats , dash interior crate motor with less than 300 miles, tranny everything. I am looking for a Typhoon motor for it and will be doing 4 then 12 18s in it. Quote
ronrico418 Posted September 13, 2008 Author Report Posted September 13, 2008 that mustang install is slick! Thanks that is pretty much the standard type of installs we are doing right now! 2Joe'sStereo 813-418-9989 Quote
EricM9104 Posted September 13, 2008 Report Posted September 13, 2008 12 18"s in a 2dr blazer!? SIIIICK. Diamond wall I assume? Quote 2015 Honda Civic LX 4dr | 110k miles | Stock 1996 GMC Yukon SLT 4dr 4wd | 260k miles | JVC Head-unit
ronrico418 Posted September 13, 2008 Author Report Posted September 13, 2008 12 18"s in a 2dr blazer!? SIIIICK.Diamond wall I assume? Loaded Horn Quote
wL<3bass Posted September 13, 2008 Report Posted September 13, 2008 Loaded Horn ummmmm ....how ? Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
ImLow78 Posted September 13, 2008 Report Posted September 13, 2008 http://i130.photobucket.com/albums/p242/Ro...008100911AM.jpg[/img] Now that is a old picture! Check out the MTX blue thunder subs.. I remember the first time I heard those sub. I had a buddy that had 4 12's in the trunk of a olds Calley (Sp?) ran with a Orion 2250sx amp. That car would drop out for back in the day. The trunk was so small that he built the subs in a isobaric enclosure! Man those where the days. Shannon Quote 2004 Tahoe.Equipment Kenwood DNX7100 Kenwood Bluetooth adapterKenwood iPod interface cableAudiocontrol DQXSAlpine PDX 4.150Rockford Fosgate punch 40DMS Diamond Audio D363.5 (6.5" Components) Front DoorsDiamond Audio D363.5 (6.5" Components) Rear DoorsJL Audio 15w0's Subs In a 8cu. ft. Box.Monster cable XLN PRO RCA'sMonster Cable 16ga speaker wireMonster Cable 1/0,4ga power, Ground cable.I only got this Monster Cable stuff because I got it dirt cheap. (Crack Head Prices)
ronrico418 Posted September 13, 2008 Author Report Posted September 13, 2008 (edited) Look closely at the picture. You can see the magnet of a sub facing back through the hole of the sub that is missing. There were 12 10 facing each other in the true folded part of the horn but the remaining 22 10s were loaded on the flares of the horn. I think I have another pic that might help lemme look up the ole photobucker again!!! This panel w/ 6 10s is the rear of the fold and will be mounted in the next pic Above you can see the wheel wells coming through the enclosure and glassed. Edited September 13, 2008 by ronrico418 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.