Gearstix Posted September 29, 2008 Report Posted September 29, 2008 I have a 2.2L 4cyl in my truck, thinking of putting in a 6.2L diesel, but I might not. Just wondering about larger alts on 4cyls, is the drag noticable, do they do any damage to the engine over time? I know theres a few of you guys with CRXs and stuff.... Quote 2005 Blazer Build... Mach 5 SPL-12s, Audiopipe AP3000.1D..
str86diesel Posted September 29, 2008 Report Posted September 29, 2008 Pending on what type of truck it is, it might not be cost effective to switch to a diesel, as you will have to replace the Transmisstion (to be able to handle the torque of the diesel) and possibly the driveline, rear differential and brakes. I would talke a look at this post to address your question about the alternator. http://www.stevemeadedesigns.com/board/ind...p;hl=alternator Adding additional Alternators won't affect the engine at all and theoretically yes it will take a little bit extra effort to turn the belt, since there is another pully added. But I think the big question is how much load will be on the alternators? kev Quote 2k6 Dodge Ram 2500...CUMMINS POWERED - SOLD
Gearstix Posted September 29, 2008 Author Report Posted September 29, 2008 (edited) Pending on what type of truck it is, it might not be cost effective to switch to a diesel, as you will have to replace the Transmisstion (to be able to handle the torque of the diesel) and possibly the driveline, rear differential and brakes.I would talke a look at this post to address your question about the alternator. http://www.stevemeadedesigns.com/board/ind...p;hl=alternator Adding additional Alternators won't affect the engine at all and theoretically yes it will take a little bit extra effort to turn the belt, since there is another pully added. But I think the big question is how much load will be on the alternators? kev Well getting a fully rebuilt engine thats about 98% complete with 40,000 miles for free really helps the budget. Edited September 29, 2008 by Gearstix Quote 2005 Blazer Build... Mach 5 SPL-12s, Audiopipe AP3000.1D..
str86diesel Posted September 29, 2008 Report Posted September 29, 2008 Nice....Free is always good. Quote 2k6 Dodge Ram 2500...CUMMINS POWERED - SOLD
ChevyBoy Posted September 29, 2008 Report Posted September 29, 2008 2.2l will be an s-10 or a sonoma Quote
Gearstix Posted September 29, 2008 Author Report Posted September 29, 2008 2.2l will be an s-10 or a sonoma Yeah... piddly. Just waiting on the 6.2... to bad it wont fit in tthe mail box. Quote 2005 Blazer Build... Mach 5 SPL-12s, Audiopipe AP3000.1D..
B Slaps Posted September 29, 2008 Report Posted September 29, 2008 i had a 300 gm style alt on my rex, it was not very friendly to my car. thats why i took it off, well that and i got tired of the belt sqeeling. Quote I Rock 4 Doors 4 More Whores! SMD SUPER SELLER my seller feedback http://www.stevemead...-mama-feedback/ more seller feedback http://www.stevemead...-slaps-yo-mama/
ChevyBoy Posted September 29, 2008 Report Posted September 29, 2008 if u put a 6.2 into an s-10, i demand pix on here. Quote
wL<3bass Posted September 29, 2008 Report Posted September 29, 2008 if u put a 6.2 into an s-10, i demand pix on here. I demand time slips. Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
Aaron813 Posted October 1, 2008 Report Posted October 1, 2008 I demand pics of the cutout you will have to do to get it in there Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.