reinke Posted December 1, 2008 Report Posted December 1, 2008 what is the liquid i can soak my brushes in when i am doing fiberglass so i dont have to keep buying them all the time? also where the hell can i get a roller from? ----reference's---- meade916
ptcary Posted December 1, 2008 Report Posted December 1, 2008 (edited) what is the liquid i can soak my brushes in when i am doing fiberglass so i dont have to keep buying them all the time? also where the hell can i get a roller from? Acetone??? **EDIT, Not sure cause I buy those cheap 99 cent brushes and go through like 6 of them for a project. Edited December 1, 2008 by ptcary PTCary 2003 SMD PT Cruiser 2011 Honda CBR 250R 2010 Mazda 3i Sport MY BUILD LOG
reinke Posted December 1, 2008 Author Report Posted December 1, 2008 i spent about $10 on brushes from marc's and used them all. i only need 1 more brush to finish my new box and i wish i would have asked this question sooner. ----reference's---- meade916
ptcary Posted December 1, 2008 Report Posted December 1, 2008 i spent about $10 on brushes from marc's and used them all. i only need 1 more brush to finish my new box and i wish i would have asked this question sooner. Never fails, when I did the inside of my wall (first time fiberglassing ever) I only bought 1 brush and five mintues later it stood up in the dried resin on its own! Someone will post up what we need. PTCary 2003 SMD PT Cruiser 2011 Honda CBR 250R 2010 Mazda 3i Sport MY BUILD LOG
wL<3bass Posted December 1, 2008 Report Posted December 1, 2008 paint/lacquer thinner? acetone? Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
roscoe1129 Posted December 1, 2008 Report Posted December 1, 2008 If they are hard your fucked. acetone works great otherwise. select products and some other specialty sites carry your rollers. Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER
roscoe1129 Posted December 1, 2008 Report Posted December 1, 2008 Rollers Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER
Aaron813 Posted December 1, 2008 Report Posted December 1, 2008 Marcs for sure isnt going to have your roller you need go to an auto body supply shop to get a roller
reinke Posted December 1, 2008 Author Report Posted December 1, 2008 thanks guys. i wasnt sure is acetone works or not. now i just gotta get ahold of my buddy who does nails and take a trip to marks and the local boat yard for a roller. i found out it is a bitch to get all the air bubbles out of the glass when i did my corners. i want to do triple layers in all the corners and i dont want to keep dabbing. ----reference's---- meade916
reinke Posted December 1, 2008 Author Report Posted December 1, 2008 Marcs for sure isnt going to have your roller you need go to an auto body supply shop to get a roller i figured that. they had/have 2?" brushes for $.27 a piece so i bought every one they had and just ran out last night. i was kinda pissed. ----reference's---- meade916
Recommended Posts