Menace89 Posted February 14, 2009 Report Posted February 14, 2009 Would these work for removing dash trim panels Dash panel removal : harbor freight or should i get something like this? Dash panel removal : ebay
The Performer Posted February 14, 2009 Report Posted February 14, 2009 Bro I'm gonna be honest with you but what you're looking at on ebay is an expensive popsickle stick with shipping. Get the HF set. That's a good bargain. CERTIFIED BITCHES!!! Not being new at something doesn't mean anything. Just because a prostitute isn't new at what she does, doesn't change the fact that she still 'sucks' Click to see my build! Proud DC owner
Menace89 Posted February 14, 2009 Author Report Posted February 14, 2009 ya i knew the one on ebay was pretty cheap lookin...i just figured i'd put it up to see what ppl thought would be better to use so i guess ill be makin a trp to HF tomorrow -thx
neuspeedescort Posted February 14, 2009 Report Posted February 14, 2009 HF has alot of good stuff. but you have to sort thru that crap to find it. that kit you found there is just the same as any craftsman or mac and about 1/3 the cost. at times some tools are no better then the brand name ones. this would be that time. NEUMAN
Team_Innovative Posted February 16, 2009 Report Posted February 16, 2009 I was at HF yesterday and almost bought that set, only reason I passed was because I already have a few removal tools. Team T3Audio Team Cactus Sounds 2008 N. American Finals 2nd place 2009 N. American Finals 1st place
raytard Posted February 16, 2009 Report Posted February 16, 2009 check snapon, ive used the plastic kinda looking ones (i guess theyre some nylon composite or something like that), they come in like 4 different shapes and sizes and work really well, and dont scratch anything really. http://buy1.snapon.com/catalog/item.asp?P6...amp;dir=catalog something like those, they sell a cheaper one thats just plastic and a bunch of different shapes/angles, i couldnt find it on the site though Build: http://www.stevemeadedesigns.com/board/ind...hl=avalon+build monster/rockford/kicker/stinger cables, pioneer source, jbl highs/amps, kinetik/shuriken batts, iraggi alt, dei security, dc subs(atleast for now) Team DC
Shyne151 Posted February 16, 2009 Report Posted February 16, 2009 If you goto harbor freight they have like a 5 or 6 piece blue plastic panel popper set... best thing out for dashes, imo. Comparable to the bright green tsunami panel poppers circuit city gave to installers wayyyyyyyyy back. I also have a couple snap-on ones like the first link you posted for door panels. -Installer for Duke's Car Stereo 2000 Pontiac Grand Prix - Ported Eaton M90 S/C, 3.5" pulley, XS Power Headers, 1.9 Rockers, FWI, Poly Motor Mounts, Custom Tune. RF T1000-1bdCP and T400-4 Boston Acoustics SPG 555 Kenwood eXcelon 995 RF Punch 6.5" components and MB Quart Premium 6x9"s Powermaster Alternator, YellowTop D34, Vmax CT1000
Neo_frog Posted February 16, 2009 Report Posted February 16, 2009 Or...you can save money and just use good old fashioned bare hands. Need an install? Hit me up.[email protected]Got car audio questions? Check here first!Everything you need to know. =]http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/
Shyne151 Posted February 17, 2009 Report Posted February 17, 2009 Or...you can save money and just use good old fashioned bare hands. I'd love to see you get the dash off an SSR with no panel poppers. -Installer for Duke's Car Stereo 2000 Pontiac Grand Prix - Ported Eaton M90 S/C, 3.5" pulley, XS Power Headers, 1.9 Rockers, FWI, Poly Motor Mounts, Custom Tune. RF T1000-1bdCP and T400-4 Boston Acoustics SPG 555 Kenwood eXcelon 995 RF Punch 6.5" components and MB Quart Premium 6x9"s Powermaster Alternator, YellowTop D34, Vmax CT1000
MXmike800 Posted February 17, 2009 Report Posted February 17, 2009 I'd love to see you get the dash off an SSR with no panel poppers. i could do it, but you would probably need to buy some panels
Recommended Posts