Jump to content

Hd Audios 95 Hoe Build 4 Fi Q 15's


Recommended Posts

Looks good but I have to ask this.....why lift then put street tires and nice wheels on? I would have dropped it and put nice wheels like that on it or lifted it like you did and put some off-road tires on it. Just me though, looks good both ways I guess.

ok then 16's with 35's

Posted Image

or 16's with 33

Posted Image

or low with 20's

Posted Image

or 20's with spinners

Posted Image

ive tried it all just going with something different it still turns heads :rolleyes:

sig-1.jpg

Jensen 9511TS~For Sale

JL Audio 300/4~For Sale

JL Audio1000/1~For Sale

Mephis 6.5 componet sets front and rear

4 15" Fi Q's in a 16 cuft box tuned to 29hrz

Link to comment
Share on other sites

Posted Image

lower this a bit in the front and now were talking

R.I.P!

(Nov-29-2009)

92 explorer

- 4 Atomic Apxx 15s duel .7s - 4rth order bandpass wall -4 powerbass XA-3000D's - 16 8volt batts wired to 16 volts - (9+/9-) runs 0gauge - 152.3 Db @ 29hz

current build

97 chevy lumina4 - 1 Atomic Apx 18 - 6 cube slot port trunk sealed off - 1 powerbass XA-3000D - 2 optima G31s in spare tire18 1 run 1/0

Link to comment
Share on other sites

lower this a bit in the front and now were talking

Yeah, drop it a bit more and this would look good.

I prefer the lift with maybe some 15" or 16" wagon wheels (black) with lots of meat though! :wub:

The woofers might suck all the air out your lungs

(if you stand too close)

When the monster hums

Link to comment
Share on other sites

why all the mud with the spinners? that kills the berrings in them

retarded build on the way.....

2000 bagged s10

2 hdc3 15s

aq2200

aq4x90

stinger/knu wire

optima batteries

220 amp alt

fosgate hu/mids and highs

Link to comment
Share on other sites

i see three things i dont like, but i LOVE the truck man.

1, front looks an inch or two too high, 2, front wheels look farther out than the rear, and 3 rims seem too small lol...

but i love it, it kills mine.

24pm3xe.jpg

im taking out my passenger seat, battery is disconnected, going to unwire and take out the three amps, take out the 70+ lb box, then the platform so i can crimp 1 wire.

Almost as bad as those fegs that put those horns in their grills and roll down the street distorting the block....

1990 Jeep Cherokee 2 Dr.

Big-3 in 0g on Stock Alt.

Pioneer 6.5" and 5.25"s temp. until i can afford the new crescendos.

Pioneer 6000ub Reciever

NO amps at the moment. SA-15 on 1kw coming soon.

MSG Me for a free enclosure design!!

Flared port kits coming soon!!

Link to comment
Share on other sites

why all the mud with the spinners? that kills the berrings in them

Man alll i can say is you only live once, and i went boggn with spinners :yahoo:

i see three things i dont like, but i LOVE the truck man.

1, front looks an inch or two too high, 2, front wheels look farther out than the rear, and 3 rims seem too small lol...

but i love it, it kills mine.

yea I had spacers on 3 inch spacers to compansate for the offset of the wheels, im going to take them off tho messes with my steering and thanks

i do agree though. nice truck

I appreciate it

sig-1.jpg

Jensen 9511TS~For Sale

JL Audio 300/4~For Sale

JL Audio1000/1~For Sale

Mephis 6.5 componet sets front and rear

4 15" Fi Q's in a 16 cuft box tuned to 29hrz

Link to comment
Share on other sites

see mattman24's?

he did it right

copy him, lol.

thanks buddy

now ur truck lower i liked the best , but hey its ur truck not mine so what do u have instore for this baby

Link to comment
Share on other sites

  • 4 weeks later...

ok Guys got my box built today It's 16 cuft after all displacement 200 inches of port tuned to 29 hrz my fouth fi q 15 should be her later today what you guys think???

Starting the back baffle

Posted Image

Posted Image

My pal workin hard

Posted Image

that be me putting tha other side on

Posted Image

Cutout for the port

Posted Image

Working on the port

Posted Image

adding some bracing

Posted Image

Posted Image

Stuck the top on to make sure things fit

Posted Image

back off again

Posted Image

more bracing

Posted Image

Sanding her level

Posted Image

holes cut out

Posted Image

Posted Image

and thats the box

sig-1.jpg

Jensen 9511TS~For Sale

JL Audio 300/4~For Sale

JL Audio1000/1~For Sale

Mephis 6.5 componet sets front and rear

4 15" Fi Q's in a 16 cuft box tuned to 29hrz

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1409 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...