sundownz Posted April 6, 2009 Report Posted April 6, 2009 Pre-Order open as of now - be sure to get these while you can as I think the first run will go quickly. ETA is mid to late June for arrival of these woofers. As always, with a pre-order the ETA is subject to change based on shipping delays, etc, etc. PLEASE do not pre-order unless you are okay with any delays that may occur. Regular MSRP will be $239 dollars - right at our low 200s target Shipped prices in Continental 48 states -- contact me for AK and HI -- USA ONLY pre-order! Paypal me at [email protected] to pre-order. $175 shipped for ONE $330 shipped for TWO $620 shipped for FOUR Ask about more than that. Two of them in my Jeep has done up to 149.7 dB in a box that is too big with too much port area, so they have great SPL potential. Not only that - but they are GREAT sounding drivers with terrific low-end extension. They feature an aluminum shorting ring and a high linear x-max of 19mm one-way. RE: 7.09 ohms (D4 in series) Fs: 28.4 Hz Qes: 0.511 Qms: 5.75 Qts: 0.469 Vas: 40.3 L BL: 25.04 NA Le: 7.7 mH Mms: 252 g BL^2 / RE: 88 600 watts RMS Depth = 6.5" Cut-Out = 10 15/16" Enclosure Suggestions: 1.75 ft^3 ported tuned to 30 Hz -- F3 of 26 Hz * Tune higher for more SPL oriented setup * Enclosure can be as big as 2.25 ft^3 if you stick with the 600 RMS rating 1.00 ft^3 sealed -- F3 of 44 Hz * For SQ and space limited applications - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
banginAltima Posted April 7, 2009 Report Posted April 7, 2009 As with your other pre-sales...Is there a xxx price until said date and then this price until.... etc. etc. If you build it, db's will come... NSPL World Record Holder Trunk 0-1800 watts---147.9 with 1722 clamped watts @ 40Hz(9-20-09). Competition Only Record Holder Trunk 0-500 watts---148.1 2006 Nissan Altima 3.5 SE Currently Rebuilding.... My 150db Plus Trunk Build I do box designs. [benH] 6:24 pm: clipping doesn't really hurt subs [benH] 6:24 pm: being an idiot is what blows subs
sundownz Posted April 7, 2009 Author Report Posted April 7, 2009 This one is a uniform price pre-sale -- its the same until the pre-order is over. - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
cookiemonster Posted April 7, 2009 Report Posted April 7, 2009 Nice. Should do well. 1989 Honda Civic 1990 Honda Crx Refs: Sundownz, Derrick824, QCguy
sundownz Posted April 8, 2009 Author Report Posted April 8, 2009 Nice. Should do well. I think so - these things are great! - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
moh.vze.com Posted April 22, 2009 Report Posted April 22, 2009 Hmm. I wonder how these are compared to my eD 13ov's DC Audio - Singer Alternators - Knukonceptz - XS Power - Hybrid Audio - Rockford Fosgate - Second Skin Audio - SMD - Sundown Audio - Elemental Designs
tibs Posted April 22, 2009 Report Posted April 22, 2009 available in dual 2? Tibs 99 F-150 Build 8 twelves 8 - Re SE 12"s 2 - SunDown Audio Saz-3000d's 1 - vx4004 planet audio amp big 3 1/0 gauge MECHMAN 250 amp alt MySpace
sundownz Posted April 22, 2009 Author Report Posted April 22, 2009 D4 only at this time. - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
sundownz Posted April 24, 2009 Author Report Posted April 24, 2009 A bit more in depth... These drivers feature the same cooling arrangement I developed for my Monster SPL woofer therefore thermal power compression is very low on these drivers - the 600 watt rating is purely mechanical as these will handle substantially more thermally. The coil is a 2.5" diameter / 45mm WW copper coil on an aluminum former. We are using flat, tied down tinsel leads to avoid the possibility of slapping the cone. Any more questions - let me know - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
Recommended Posts