Jump to content

The Saturn: Cant Stop There (dual 18's Upgrade)


Recommended Posts

Posted

you might want to put bushings on the amp screws just to be safe bro i would hate to see this build do down from an amp shaking to death but damn all your edges look hella clean nice bro

Roseville, CA

Posted

Thanks guys :) And yea I think the mounting points of the amp will get some rubber spacings in the near future.

Wish me luck on the meter today :)...hoping to get loud and still stay low

Team Tupperware

<First dual-alternator 'real' Saturn (pre-2002) on the planet>
(3) 15" Fi SP4's fed by (2) M3a's strapped @ .667
12.75 cubes net @ 25Hz with 200 sq inches of port area (lowz...?)
Stock alt position (custom bracket) 225 amp Mechman

Roof = steel and fiberglass (u mad?)
(2) XS Power D3100's, (2) rhino batts, No battery upfront (for now, smh)
4 power+ 4 ground runs of 1/0-gauge to rear
"If its been done before...you're doing it wrong" : )

"stfu about scores and float $hit..."

Posted

there best be videos

R.I.P!

(Nov-29-2009)

92 explorer

- 4 Atomic Apxx 15s duel .7s - 4rth order bandpass wall -4 powerbass XA-3000D's - 16 8volt batts wired to 16 volts - (9+/9-) runs 0gauge - 152.3 Db @ 29hz

current build

97 chevy lumina4 - 1 Atomic Apx 18 - 6 cube slot port trunk sealed off - 1 powerbass XA-3000D - 2 optima G31s in spare tire18 1 run 1/0

Posted

this is a siiick build! im lovin it, good luck @ the comp. cant wait to see more pics and some vids!

2006 Altima 2.5

Alpine Iva- w200 Head unit

2 L7 kicker 12s in a slot ported box tuned to 38 Hz

Rf T10001 @ 1 ohm

Rf P4004 @ 4 ohms

Poineer TS-D161R 6.5" in door panels

Pioneer TS-D690R 6" x 9" in rear

stinger 1/0 wiring

Posted

Thanks guys and no vids until this week, sorry. It's getting dusky here and my camera takes crappy videos without perfect lighting :(

But I pulled a 149.7 @ 40Hz right off the bat for qualifying, no testing etc and the trunk still wide open to the cabin and not sealed off or anything. Then I put a whole 55 yrd roll of duct tape on the rear deck and sides of the enclosure to try and seal it off better and pulled a 150.0 @ 41Hz :) I was pretty happy with the score but wasnt expecting it to peak around 41Hz with the enclosure being tuned pretty darn low...but then again I did loose a good amount of cabin space etc.

We'll see how it does in the future with the trunk sealed off and other things taken care of :)

Starting the duct tape..

Posted Image

Posted Image

Posted Image

Some of the comp..

Posted Image

Posted Image

Pulled a 160.1 before they left..(Super street 1-2)

Posted Image

But im very pleased with it, sounds great on music, gets loud, and great on the lows for sure...im just a little worried for my sunroof :(..it's really moving now and might get pushed up out of the seal+track a bit.

Team Tupperware

<First dual-alternator 'real' Saturn (pre-2002) on the planet>
(3) 15" Fi SP4's fed by (2) M3a's strapped @ .667
12.75 cubes net @ 25Hz with 200 sq inches of port area (lowz...?)
Stock alt position (custom bracket) 225 amp Mechman

Roof = steel and fiberglass (u mad?)
(2) XS Power D3100's, (2) rhino batts, No battery upfront (for now, smh)
4 power+ 4 ground runs of 1/0-gauge to rear
"If its been done before...you're doing it wrong" : )

"stfu about scores and float $hit..."

Posted

And I take my statement back about how it wasnt that much louder...It is very noticeably louder now, lol. I just think I didnt have settings adjusted yet and didnt turn it up for that first test-drive.

Team Tupperware

<First dual-alternator 'real' Saturn (pre-2002) on the planet>
(3) 15" Fi SP4's fed by (2) M3a's strapped @ .667
12.75 cubes net @ 25Hz with 200 sq inches of port area (lowz...?)
Stock alt position (custom bracket) 225 amp Mechman

Roof = steel and fiberglass (u mad?)
(2) XS Power D3100's, (2) rhino batts, No battery upfront (for now, smh)
4 power+ 4 ground runs of 1/0-gauge to rear
"If its been done before...you're doing it wrong" : )

"stfu about scores and float $hit..."

Posted

videos!!!!!!!!!!

I can't stop building!!!


4 DC LeveL 4XL 18 Blow Through Re-Build
The newest addition My '97 Ford Explorer Build
My First Build 8 RF P1 12's
My Myspace Add Me
My Facebook Add Me

oh, your a hypocrite too bro.....your mom has my name on her left tit - and you still like her dont you?

If youre masturbating to that sub already, wait until you get a real sub... I think your nutsack will shrivel up.
Posted

videos!!!!!!!!!!

Sorry mane :(...videos in the near future..my camera can't take vids for jack in the dark/dusk :(

And it definitely could hair trick today, might get a few in there.

Team Tupperware

<First dual-alternator 'real' Saturn (pre-2002) on the planet>
(3) 15" Fi SP4's fed by (2) M3a's strapped @ .667
12.75 cubes net @ 25Hz with 200 sq inches of port area (lowz...?)
Stock alt position (custom bracket) 225 amp Mechman

Roof = steel and fiberglass (u mad?)
(2) XS Power D3100's, (2) rhino batts, No battery upfront (for now, smh)
4 power+ 4 ground runs of 1/0-gauge to rear
"If its been done before...you're doing it wrong" : )

"stfu about scores and float $hit..."

Posted

Thanks.

And yea, I was pretty sure I'd see a healthy gain the first run with this, lol.

Team Tupperware

<First dual-alternator 'real' Saturn (pre-2002) on the planet>
(3) 15" Fi SP4's fed by (2) M3a's strapped @ .667
12.75 cubes net @ 25Hz with 200 sq inches of port area (lowz...?)
Stock alt position (custom bracket) 225 amp Mechman

Roof = steel and fiberglass (u mad?)
(2) XS Power D3100's, (2) rhino batts, No battery upfront (for now, smh)
4 power+ 4 ground runs of 1/0-gauge to rear
"If its been done before...you're doing it wrong" : )

"stfu about scores and float $hit..."

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members (See full list)

    • There are no registered users currently online
×
×
  • Create New...