Bass4Lyfe Posted April 29, 2009 Report Share Posted April 29, 2009 Hey guys - My alarm sys is in sig. I know i know it's not a directed but its what I have right now ... My issue: Everything working fine for months (year? not sure when i got it) Recently the door's won't lock (alarm arms and works fine) but they unlock fine.. I tried the timing, pulse lenth from 1-3 seconds still no luck any ideas? Quote ~Matthew 1998 Toyota Camry XLE V6 3L (1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm with Shock and Proximity (1) 20% Tint All Around (Gately Audio) (1) 250 Amperage HO Alternator (1) Big 3 Done In 1/0 (2) Kinetik HC2400 Power Cell (1) Alpine IVA-D106 Receiver (1) Peripheral Video Bypass Device (4) Alpine SPS-17C2 Speakers (1) Alpine KCE-422i iPod Control Interface (4) Sheets Dynamat Extreme; for speakers (1) 10 Square Feet Hushmat (Trunk & Rear Deck) (4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils (1) Wall Built By David, Tuned to 32 Hz (1) Rockford Fosgate T40001bd Amplifier (1) Stinger 1/0 Wiring (2 runs of + 2 runs of -) (1) Stinger Volt Meter Link to comment Share on other sites More sharing options...
raytard Posted April 29, 2009 Report Share Posted April 29, 2009 get in the car and manually lock with the button in the car, if it doesnt do it then, its the actuators going out. They are usually only good for like 10-12 years in my experience (and personally, my driver door is on its way out, doing the exact same as yours) if thats the case its an easy fix, assuming you didnt dynamat the door holes all up, iirc correctly they are pretty cheap and can be as changed as fast as a door speaker. if your car does unlock fine with the door button, time to troubleshoot some more.... Quote Build: http://www.stevemeadedesigns.com/board/ind...hl=avalon+build monster/rockford/kicker/stinger cables, pioneer source, jbl highs/amps, kinetik/shuriken batts, iraggi alt, dei security, dc subs(atleast for now) Team DC Link to comment Share on other sites More sharing options...
Clif Posted April 29, 2009 Report Share Posted April 29, 2009 how do you have your alarm hooked up to your door locks? Quote 03 Trailblazer EXT LT In Dash Rear Flip Down Polk Audio Font & Rear Stage Hifonics Zeus 4 Chan Amp Hifonics Brutus Mono Amp 12" Rockford Fosgate Power HX2 T-Line tuned to 45hz 18"BTL T-line @31Hz (9 weeks pregnant) Link to comment Share on other sites More sharing options...
Bass4Lyfe Posted April 29, 2009 Author Report Share Posted April 29, 2009 THe door does unlock just fine with the button on the inside of the door. Clif - I had a shop do proffessional installation.. Quote ~Matthew 1998 Toyota Camry XLE V6 3L (1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm with Shock and Proximity (1) 20% Tint All Around (Gately Audio) (1) 250 Amperage HO Alternator (1) Big 3 Done In 1/0 (2) Kinetik HC2400 Power Cell (1) Alpine IVA-D106 Receiver (1) Peripheral Video Bypass Device (4) Alpine SPS-17C2 Speakers (1) Alpine KCE-422i iPod Control Interface (4) Sheets Dynamat Extreme; for speakers (1) 10 Square Feet Hushmat (Trunk & Rear Deck) (4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils (1) Wall Built By David, Tuned to 32 Hz (1) Rockford Fosgate T40001bd Amplifier (1) Stinger 1/0 Wiring (2 runs of + 2 runs of -) (1) Stinger Volt Meter Link to comment Share on other sites More sharing options...
n8ball2013 Posted April 29, 2009 Report Share Posted April 29, 2009 take that shit back. if it was done and you paid for it make htem fix it Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
Bass4Lyfe Posted April 29, 2009 Author Report Share Posted April 29, 2009 i will if its broken! i just wanna make sure its not a setting or something.. Quote ~Matthew 1998 Toyota Camry XLE V6 3L (1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm with Shock and Proximity (1) 20% Tint All Around (Gately Audio) (1) 250 Amperage HO Alternator (1) Big 3 Done In 1/0 (2) Kinetik HC2400 Power Cell (1) Alpine IVA-D106 Receiver (1) Peripheral Video Bypass Device (4) Alpine SPS-17C2 Speakers (1) Alpine KCE-422i iPod Control Interface (4) Sheets Dynamat Extreme; for speakers (1) 10 Square Feet Hushmat (Trunk & Rear Deck) (4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils (1) Wall Built By David, Tuned to 32 Hz (1) Rockford Fosgate T40001bd Amplifier (1) Stinger 1/0 Wiring (2 runs of + 2 runs of -) (1) Stinger Volt Meter Link to comment Share on other sites More sharing options...
basskartel Posted April 30, 2009 Report Share Posted April 30, 2009 have you metered the door unlock wire ouput from the alarm, ive seen them not go directly to ground and therefore not unlock the door. its a common issue we have with compustar systems. a little more info and im sure we can figure out whats wrong, pm me if you want Quote Link to comment Share on other sites More sharing options...
Shyne151 Posted April 30, 2009 Report Share Posted April 30, 2009 THe door does unlock just fine with the button on the inside of the door.Clif - I had a shop do proffessional installation.. BUT does it lock fine with the button on the inside of the door? Quote -Installer for Duke's Car Stereo 2000 Pontiac Grand Prix - Ported Eaton M90 S/C, 3.5" pulley, XS Power Headers, 1.9 Rockers, FWI, Poly Motor Mounts, Custom Tune. RF T1000-1bdCP and T400-4 Boston Acoustics SPG 555 Kenwood eXcelon 995 RF Punch 6.5" components and MB Quart Premium 6x9"s Powermaster Alternator, YellowTop D34, Vmax CT1000 Link to comment Share on other sites More sharing options...
raytard Posted April 30, 2009 Report Share Posted April 30, 2009 yea, we know unlock works, the question is whether it LOCK from inside, thats the one that has the problem on the alarm, right? Quote Build: http://www.stevemeadedesigns.com/board/ind...hl=avalon+build monster/rockford/kicker/stinger cables, pioneer source, jbl highs/amps, kinetik/shuriken batts, iraggi alt, dei security, dc subs(atleast for now) Team DC Link to comment Share on other sites More sharing options...
Ray Posted May 1, 2009 Report Share Posted May 1, 2009 if the button works fine, then the lock wire prob came undone. And it should not matter if you want to make sure.. just take it back to the shop and act dumb. say this....... Ummmm my doors quit locking, can you see if its my alarm... it works with my switch. thats all you have to say Quote 2008 California state record holder 157.2 Bassrace2009 California state record holder 157.0 BassraceRollin 50's 158.7db2009 King of Cali Bassrace2009 USACi score 160.5 @ 42hz Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.