LordArcane Posted June 19, 2009 Report Share Posted June 19, 2009 ok i want to run 2, dvc 2ohm subs on one amp thats 1ohm stable. like most mono block amps it has 2 sub channel outs. now can i run each sub in parallel to bring each sub to 1ohm and just hook one sub to each of the 2 channels? Link to comment Share on other sites More sharing options...
AI James Posted June 19, 2009 Report Share Posted June 19, 2009 2 d2s cannot run at 1ohm Link to comment Share on other sites More sharing options...
LordArcane Posted June 19, 2009 Author Report Share Posted June 19, 2009 so i could not run them like this and still be 1ohm stable? Link to comment Share on other sites More sharing options...
C 45. Posted June 19, 2009 Report Share Posted June 19, 2009 thats half ohm or you can wire it the other way and get 2 ohms must be nice huh Link to comment Share on other sites More sharing options...
LordArcane Posted June 19, 2009 Author Report Share Posted June 19, 2009 thanks for the info guys Link to comment Share on other sites More sharing options...
Berto Posted June 19, 2009 Report Share Posted June 19, 2009 You can look on the Rockford Fosgate site and they have a thing called "Woofer Wiring Wizard" and that should be very helpful. TEAM FLEX ISSUES Car: 1985 Oldsmobile Delta 88 Royal 24" Rims HU: 7" Carputer, Planet Audio EQ, iPhone. Coax: T3 Audio 4" speakers Subs: 2x 18" T3 Audio TSNS (walled) Sub Amp: DC 9k SOON TO COME T3 Audio 6x9s MB Quarts 6.5" comp set MAYBE ADDED 2nd DC 9k Link to comment Share on other sites More sharing options...
LordArcane Posted June 19, 2009 Author Report Share Posted June 19, 2009 You can look on the Rockford Fosgate site and they have a thing called "Woofer Wiring Wizard" and that should be very helpful. yup, www.the12volt.com has one too just wasn't sure since its mono block amp has 2 channels so wasn't sure if i could put 1ohm to each of the speaker outs and still have the amp at 1ohm Link to comment Share on other sites More sharing options...
Forevrbumpn Posted June 19, 2009 Report Share Posted June 19, 2009 What your confused on is how there is 2- and 2+ outs on the amp. If its a mono block, each + is the same, and each- is the same, its just distro blocks in the amp. makes it easier to wire subs. supposed to be dummy proof I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.