JLAudio_15 Posted June 22, 2009 Report Posted June 22, 2009 I have 2 Jl audio w7 13.5 subs and i wanted to put a kicker 2500.1 amp to them. i looked up the kicker specs and it says 2500 watts @ 2ohms. but the w7s are dual 1.5 ohm and wire down to 0.38 ohm in parallel or 1.5 ohm in series wiring.....will the amp be able to handle either of these???? thanks in advance!!! http://www.stevemeadedesigns.com/board/public/style_emoticons/default/hairtrick.gif
white4d96 Posted June 22, 2009 Report Posted June 22, 2009 Definitely not .38, but idk about 1.5 Too many projects, too little time...
fourlug Posted June 22, 2009 Report Posted June 22, 2009 I ran both mine @ 1 ohm... daily. Better have a good electrical
07sOnAtA sp.ed Posted June 22, 2009 Report Posted June 22, 2009 I ran both mine @ 1 ohm... daily. Better have a good electrical exactly they should be find aslong as you got the electrical to run em. not at .38 or .5 for that matter, but 1ohm ive seen done b4 in a daily set-up CURRENTLY UNDER RE-CONSTRUCTION 2008 Hyundai Sonata Team T3 Audio Team Deadly Hertz Team SMD (Street Motivated Devastation)
Crump Posted June 22, 2009 Report Posted June 22, 2009 Yes Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs
EricM9104 Posted June 22, 2009 Report Posted June 22, 2009 if you have to ask, no. 2015 Honda Civic LX 4dr | 110k miles | Stock 1996 GMC Yukon SLT 4dr 4wd | 260k miles | JVC Head-unit
rckstar Posted June 22, 2009 Report Posted June 22, 2009 dont run it below 2 ohm... Warranty will be void my motto: hit it, quit it, never admit it
Hugh G. Rection Posted June 22, 2009 Report Posted June 22, 2009 so 1.5 ohms should be fine???????my experience with the 2500.1 is that it all depends on your impedance rise. Owner of BigAss Ports
JLAudio_15 Posted June 22, 2009 Author Report Posted June 22, 2009 my experience with the 2500.1 is that it all depends on your impedance rise. whats that mean???
Recommended Posts
Archived
This topic is now archived and is closed to further replies.