wL<3bass Posted July 31, 2009 Author Report Share Posted July 31, 2009 Also from your build thread I noticed your box (and port) sits pretty close to the rear gate. Only about 4" clearance behind the port I'm thinking?When I had my box in this position it was very noticeably less output. I've got it at about 8" of clearance now and it's quite a bit louder. If you fold your back seats down you can slide the box forward, I wouldn't be surprised if it got louder for you actually its about 6 or so inches from the back Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
bobonit Posted July 31, 2009 Report Share Posted July 31, 2009 Nice !!! Quote 97 Maxima SE Bunch of shit going in, check out the build Build Log Link to comment Share on other sites More sharing options...
tacomabanga1986 Posted July 31, 2009 Report Share Posted July 31, 2009 haha, that shit wangin son, good job, ya i built a box by mtx's specs for my 5500 but threw a 8000 in it n damn at the lows @ 37-38htz tuning is unreal, acually hit lows better with one sub inverted ported than 2 downfired sealed, but they do play lows somethin awesome, wished i could find a place were i can full tilt my system with windows down to show what it will do, all my vids have been with windows up Quote here's a link to my system 99 toyota tacoma , 2 mtx 8000 1504's in a sealed downfire , 1000w memphis amp here's a link to my other system my 90 geo prizm test car heres a thread i got of new songs u can dl that are legal = Some Good Bangage/you Can Dl These Free And Legit Link to comment Share on other sites More sharing options...
TeamNemesis_Jessie Posted August 1, 2009 Report Share Posted August 1, 2009 Nice Video Bro Quote Link to comment Share on other sites More sharing options...
Guero3384 Posted August 1, 2009 Report Share Posted August 1, 2009 dam thats some flex got any sound deadening in that ??? Quote Check out my build http://www.stevemeadedesigns.com/board/ind...mp;#entry717600 4 12" Kicker L7's 1 zx2500.1 Kicker Amp 1 zx650.4 Kicker Amp All Kicker 1/0 Wire Headunit Jvc Kw-Nx7000 3 sets of 6.5 Image Dynamics CXS6 series Link to comment Share on other sites More sharing options...
mbdblue Posted August 1, 2009 Report Share Posted August 1, 2009 goddamn! she breathin aight...sick job man Quote AA-Atomic-Clif Designs-DC-Diamond-Digital Designs-Directed-Eclipse-Fi-Hertz-Hifonics-Kenwood-Memphis-Phoenix Gold-Pioneer-PPI-PSi-Stinger-Sundown-TC Sounds-Viper-Zapco Link to comment Share on other sites More sharing options...
skittlesRgood Posted August 1, 2009 Report Share Posted August 1, 2009 the point of a subsonic filter is to STOP the subs from playing below the box tuning. of corse the subs can play lows no matter what you tune the box to. but you can overthrow the subs. im really not an expert but this is my understanding of tuning. i just dont want to see you break a woofer. the flex looks very nice and i love the glass work. fix that roof b4 it looks like mr.p's!! Quote If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood. Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s. http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/ Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build Yeah. im pretty sure they dont warranty retarded people. Link to comment Share on other sites More sharing options...
wL<3bass Posted August 1, 2009 Author Report Share Posted August 1, 2009 dam thats some flex got any sound deadening in that ??? Yeh 62sqft of deadener in it currently....that continuous flapping in the rear vents and the exhaust....I was playing some low stuff and broke one my my rusty exhaust hangers... There is 2-3layers on the roof. Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
wL<3bass Posted August 1, 2009 Author Report Share Posted August 1, 2009 the point of a subsonic filter is to STOP the subs from playing below the box tuning. of corse the subs can play lows no matter what you tune the box to. but you can overthrow the subs. im really not an expert but this is my understanding of tuning. i just dont want to see you break a woofer.the flex looks very nice and i love the glass work. fix that roof b4 it looks like mr.p's!! Yeh my subs don't unload whatsoever....even on Bass I Love You C&S full tilt.... Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
knowledge Posted August 1, 2009 Report Share Posted August 1, 2009 wow! thats some flex right their! Quote REFF'SMy linkEBAYhttp://feedback.ebay...ck&myworld=trueI love car audio so much because I will never be done. I can never win, and I will never get it finished or perfect. It always has me coming back for more, I can never get my fill of it, but I get what I need. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.