EricM9104 Posted August 1, 2009 Report Share Posted August 1, 2009 very nice Must have some pretty good electrical to play the whole song full tilt without reving read his sig and you'll e fully ingotmredf :01nocomment8so: Also from your build thread I noticed your box (and port) sits pretty close to the rear gate. Only about 4" clearance behind the port I'm thinking?When I had my box in this position it was very noticeably less output. I've got it at about 8" of clearance now and it's quite a bit louder. If you fold your back seats down you can slide the box forward, I wouldn't be surprised if it got louder for you depends on the prt port sizwe.... sometimes when the port width and reat gate ahbve didrt proportion, it'[ll lengthen the tuning and go from like 35hz tning to 25hz tuning opr something.... really depend opn the box specs... Quote 2015 Honda Civic LX 4dr | 24k miles Stock H/U and mids/highs Power Acoustik GW3-12" D2 Sub HiFonics BXX1200.1D @ 1ohm Random 2.5^3' dual ported box NVX LOC Stinger wiring throughout 1977 Chevy SWB Cammed 350 Dual exhaust Cheap Wish stereo Link to comment Share on other sites More sharing options...
BITLD Posted August 3, 2009 Report Share Posted August 3, 2009 You'll be buying recones soon enough if you keep playing way below tuning like that. Put a subsonic filter on or drop the tuning point. Quote www.BladeICE.com UK/European Distributors Ascendant Audio Fi Car Audio XS Power KnuKonceptz.co.uk Facebook Youtube Channel Link to comment Share on other sites More sharing options...
Team Nemesis-DJ Posted August 3, 2009 Report Share Posted August 3, 2009 Nice !! Quote Link to comment Share on other sites More sharing options...
Slapuhho Posted August 3, 2009 Report Share Posted August 3, 2009 That thing is wangin'! Nice video man. Quote 4 18's, low power and lots of gay fur. Team gg Team DOA My Videos Link to comment Share on other sites More sharing options...
NDMstang65 Posted August 3, 2009 Report Share Posted August 3, 2009 You better turn that subsonic on before you email me about reconing your subs because you are going to break them with a box tuned that high and no subsonic filters on... It also would need to be set @ 34Hz with that 38Hz tuning on that enclosure. Quote Authorized Ascendant Audio Dealer! Message me for information. If you can't explain it simply, you don't understand it well enough -Albert Einstein "I have a plausible excuse for not liking you. And you know why." Link to comment Share on other sites More sharing options...
arthurk Posted August 3, 2009 Report Share Posted August 3, 2009 Killer flex bro! Quote Arc Audio Pioneer Memphis Massive Mechman Rockford Fosgate Dakota Digital Soon to be DC audio!!! Link to comment Share on other sites More sharing options...
zaxfire69 Posted August 7, 2009 Report Share Posted August 7, 2009 I took my headliner out yesterday to discover that one of my braces on my roof had seperated. The BL's did some damage. Quote Link to comment Share on other sites More sharing options...
superduper Posted August 7, 2009 Report Share Posted August 7, 2009 nice flex.... Quote Link to comment Share on other sites More sharing options...
keepinitloud Posted August 7, 2009 Report Share Posted August 7, 2009 Yeh 62sqft of deadener in it currently....that continuous flapping in the rear vents and the exhaust....I was playing some low stuff and broke one my my rusty exhaust hangers...There is 2-3layers on the roof. sonabitch you have 2 to 3 layers and your still getting flex like that gawddam Id immagine what it would be like without the sound deadner Quote 06 chrysler 300C Hemi one mmatts dreadnaut 15 powered by a planet audio vx 2200d fosgate p200 running planet audio 8" midbass drivers and super compression tweeters stock battery and a stinger spv44 Irragi 300 amp alternator big 3 1/0 http://www.stevemeadedesigns.com/board/topic/55075-system-in-my-300c/page__view__findpost__p__763656__fromsearch__1 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.