Tahoe System Rebuild 2009 is ALL BUT FINISHED and PLAYING!!!! UPGRADE to RF P2 8's 12/08/2009!

[Jville140db]

its more complicated then that.

First of all, the D3100 is a BIG ASS BATTERY. No way in hell 6 will fit even with the floor cut out.

Second, i have a roll pan. If i had a bumper and a tow hitch still, i would have more options, not many more but just a little. Still not enough room for 6 and CERTAINLY not a simple bolt up if you could even do it. Also you have to take the terminals and what your gonna do about them into consideration.

I could probably get 6 D3400's (smaller) back there though.

looks like its time to go 16v and d1000's

[meade916]

nahh. My amps wont like 16v without the protect circuit being modded. I dont feel like dealing with the hassle. Im at 15.3 - 15.5 most days thats more then plenty.

[Jville140db]

nahh. My amps wont like 16v without the protect circuit being modded. I dont feel like dealing with the hassle. Im at 15.3 - 15.5 most days thats more then plenty.

Just throwin it out there you know I thought about it on the old car rf's dont like 16 thought they were able to till like 16.5 to 17

[Forevrbumpn]

Okay, I didn't realize the roll pan made a huge difference

I do have a tow hitch, and its not in the way of my spare tire, and my spare tire is about 9-10" wide, I figure at least in mine, even though I have a 4/6 drop, I could still do about 2 inches lower, and since your a little higher than me, you could squeeze more down there

I guess in mine with factory 16"s and the drop I have I would have speed bump issues dropping even lower

It was just a thought I had a while back, I thought I would throw out there

[meade916]

Okay, I didn't realize the roll pan made a huge difference

I do have a tow hitch, and its not in the way of my spare tire, and my spare tire is about 9-10" wide, I figure at least in mine, even though I have a 4/6 drop, I could still do about 2 inches lower, and since your a little higher than me, you could squeeze more down there

I guess in mine with factory 16"s and the drop I have I would have speed bump issues dropping even lower

It was just a thought I had a while back, I thought I would throw out there

ground clearance isnt the problem. The batteries showing because they stick down lower then the pan IS the problem. Also, you STILL dont have room for 6 D3100's - ive already done this remember (chickens EXT) and just FOUR was a challenge all by itself. The floor wasnt cut out though. Even then i had to fiberglass that lip because too much of them were showing - There just is NOT that much room there. It looks like it but until you have a D3100 sitting in front of you or even better, a HOLLOW one like i do (so you can physically try it and see) you will know it aint happenin.

You have a 4/6 on 16's? DAMN i wouldnt be able to go over a speed bump if i had them things on my ride. Shit even some little 20's would have me on the ground

[kryptonite]

10 D3100 shit thats alot of power

I think there should be a 5th Iraggi alt shoehorned in there, one alt per pair of D3100s, thats alot of juice

[Kasey]

I think there should be a 5th Iraggi alt shoehorned in there, one alt per pair of D3100s, thats alot of juice

That would be sweet

[rusty959]

I think there should be a 5th Iraggi alt shoehorned in there, one alt per pair of D3100s, thats alot of juice

That would be sweet

Keep in mind 4 alts is still a lot of juice... And already is sweet. Maybe some people underestimate what is already there?

[kryptonite]

Well i know it's already alot of power and it already is damn awesome, no where near under estimated, but it was just an idea

[doubleD]

no thanks....no room for that. I will probably reinforce that hatch more somehow - maybe even make the hatch glass perma shut since i get so much pressure loss there.

i made a new panel to fit in place of the bottom interior panel on the back hatch of my yukon,,,it was 1/8 inch thick an double that where tha ports are on my box,,,finished it out with some fiberglass to smooth it out and painted it,,, if its to heavy the hatch wont hold itself up